Intermec PF2i PF2i and PF4i Mid-Range Printer User's Manual - Page 71
Connecting Peripherals to the USB Host Port, Using a USB Mass Storage Device
View all Intermec PF2i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Chapter 2 - Connecting the Printer Connecting Peripherals to the USB Host Port You can connect these peripheral devices to the USB host interface port on the printer: • USB mass storage device • Keyboard • Bar code scanner • USB hub Using a USB Mass Storage Device You can use a USB mass storage device (thumb drive) to store additional fonts and images for the printer. You can also use the device to upgrade your firmware. For more information on using the USB mass storage device to upgrade the printer, see "Upgrading Firmware" on page 90. To verify the USB storage device is supported by your printer, insert the USB storage device in the appropriate slot on the back of your printer. On the display screen, one of the following status messages briefly appears: • USB memory stick connected • USB memory stick not supported If no status message appears when you insert the USB storage device, you can manually verify the USB storage device is supported using HyperTerminal. To verify the USB storage device is supported by your printer 1 Connect one end of your serial cable to your printer, and connect the other end to your PC. 2 On your PC, open HyperTerminal. 3 In HyperTerminal, use one of the following Fingerprint commands: • Type DEVICES. The list of devices your printer supports appears. If the USB storage device is supported, it appears as drive d: in this list. PF2i and PF4i Mid-Range Printer User's Manual 57