Intermec PR2 PR2/PR3 Mobile Receipt Printer User Manual - Page 56
Bluetooth Settings
View all Intermec PR2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Appendix B - Printer Settings Media and Printing Settings (Continued) Setting Media Width Print Speed Start Adjustment Stop Adjustment Description Default Sets the width of the printable area PR2: 384 measured from the media margin PR3: 576 (X) along the printhead. Unit of measurement is defined by the Unit of Measure parameter. Sets how fast the printer prints labels. Unit of measurement is defined by the Unit of Measure parameter. 75 mm/s Sets the length of media the printer 0 feeds (positive value) or retracts (negative value) before printing a label. Unit of measurement is defined by the Unit of Measure parameter. Sets the length of media the printer 0 feeds (positive value) or retracts (negative value) after printing a label. Unit of measurement is defined by the Unit of Measure parameter. Bluetooth Settings You can view and configure Bluetooth settings from: • the printer web page. • PrintSet version 5.2 or later. Bluetooth Settings Setting Connectable Device Address Description Determines if other Bluetooth devices can connect to the printer. (read-only) The Bluetooth MAC address of the printer. Default Enable N/A 44 PR2 and PR3 Mobile Receipt Printer User Manual