Intermec PX4i Printer 802.11 Radio Interface Kit Installation Instructions - Page 5
Opening the Printer
View all Intermec PX4i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Opening the Printer The method you use to open the printer depends on what type of printer you are opening. To open a PD41 or PD42 1 Open the media cover. Screw (6 places) 2 Use a small Phillips screwdriver to remove the four screws that secure the media cover to center section. 3 Remove the media cover, and put the cover aside on a soft cloth to avoid scratches. 4 Remove the two screws that secure the electronics cover to the center section. 5 Remove the electronics cover, and put the cover aside on a soft cloth to avoid scratches. You may need to pry the cover off of the printer. Printer 802.11 Radio Interface Kit Installation Instructions 5
Printer 802.11 Radio Interface Kit Installation Instructions
5
Opening the Printer
The method you use to open the printer depends on what type of
printer you are opening.
To open a PD41 or PD42
1
Open the media cover.
2
Use a small Phillips screwdriver to remove the four screws
that secure the media cover to center section.
3
Remove the media cover, and put the cover aside on a soft
cloth to avoid scratches.
4
Remove the two screws that secure the electronics cover to
the center section.
5
Remove the electronics cover, and put the cover aside on a
soft cloth to avoid scratches. You may need to pry the cover
off of the printer.
Screw
(6 places)