Intermec SG10T SG10T Tethered Scanner User's Guide - Page 20
USB Interface, Connecting a USB Cable
View all Intermec SG10T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Chapter 3 - SG10T Interfaces USB Interface The SG10T can be connected to a USB host using the provided USB cable. It is USB and is powered by the host. See the "Accessories" on page 4 for a list of part numbers for the different cables. Connecting a USB Cable To connect with a USB cable 1 Turn off your host device. 2 Connect the USB cable to your SG10T and to the host. Click USB cable 3 The scanner beeps and is automatically detected by the host. 4 Turn on your host device. 5 If necessary, configure your SG10T for an International keyboard (see "Setting up an International Keyboard" on page 13). The default keyboard is North America. 12 SG10T Tethered Scanner User's Guide
Chapter 3 — SG10T Interfaces
12
SG10T Tethered Scanner User’s Guide
USB Interface
The SG10T can be connected to a USB host using the provided USB
cable. It is USB and is powered by the host. See the
“Accessories” on
page 4
for a list of part numbers for the different cables.
Connecting a USB Cable
To connect with a USB cable
1
Turn off your host device.
2
Connect the USB cable to your SG10T and to the host.
3
The scanner beeps and is automatically detected by the host.
4
Turn on your host device.
5
If necessary, configure your SG10T for an International keyboard
(see
“Setting up an International Keyboard” on page 13
). The
default keyboard is North America.
Click
USB cable