Intermec SG10T SG10T Tethered Scanner User's Guide - Page 31

Chapter 4 - Configuring the SG10T 5 Use this test bar code to check that your preamble or postamble is correctly configured: Code 39 Test Bar Code *123456* 123456 Configuring Your Scanner with EasySet EasySet is an Intermec configuration application that provides you with an easy way to configure your scanner. The SG10T can be configured using EasySet in offline mode, that is by: • sending configuration commands from EasySet to a bar code setup sheet, • printing the setup sheet, • using a connected scanner to scan the bar codes. Note: The online setup mode - send configuration commands from EasySet directly to the product - is not supported by the SG10T. EasySet is available on the Intermec website at www.intermec.com/ EasySet. Simply download and install. To configure your scanner offline by scanning bar codes 1 Start EasySet. The first time you start EasySet, the Select product dialog box appears. If the Select product dialog box does not appear, choose Product > Select or click on the product icon in the upper left corner. 2 Select your product. 3 Open the folders to find the configuration commands needed. Double-click each command to send each command to the setup sheet. 4 Click on the Word icon to export the setup sheet to Microsoft Word. Print out the setup sheet and scan the commands. SG10T Tethered Scanner User's Guide 23