Invacare M94 Owners Manual - Page 42
Disconnecting/Connecting the Joysticks
View all Invacare M94 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
SECTION 5-WHEELCHAIR OPERATION Hex Mounting Screws Adjustment Lock Lever Locknuts Arm Frame Spacers Joystick Mounting Tube Mounting Bracket FIGURE 5.11 Repositioning the Joystick - Van Seat Model Disconnecting/Connecting the Joysticks NOTE: For this procedure, refer to FIGURE 5.12. NOTE: The joystick connector is located at the rear of the seat frame. SPJ+ Joysticks 1. Hold the light GREY collar portion of the joystick connector with one hand and the controller connector on the wheelchair in the other and disconnect them by pulling them apart. Connecting ƽ WARNING The joystick connector and controller connector fit together in one way only. DO NOT force them together. 1. Hold the light GREY collar portion of the joystick connector with one hand and the controller connector on the wheelchair in the other and align them. 2. Lightly push to engage the joystick connector and the controller connector. Light Grey Collar Joystick Connector Controller Connector FIGURE 5.12 Disconnecting/Connecting the Joysticks - SPJ+ Joysticks Pronto® M94™ 42 Part No 1122145