Invacare RECLSYS Owners Manual 2 - Page 33
SAFETY/HANDLING OF WHEELCHAIRS, Percentage of Weight Distribution
View all Invacare RECLSYS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
SECTION 2-SAFETY/HANDLING OF WHEELCHAIRS NOTE: For this procedure, refer to FIGURE 2.1. Changing the position of where the motors are positioned affects the weight distribution over the rear wheels. The following contains information about changing the position of the motors. Rear Position - Lengthens the wheelbase and gives the wheelchair the most stability and standard maneuverability. Middle Position - Centers the wheelbase and gives the wheelchair standard stability and maneuverability. Forward Position - Shortens the wheelbase and increases maneuverability and distributes additional weight on rear wheels. *NOTE: The forward mounting position is not available on Arrow wheelchairs equipped with GB motors. The following shows the positions of the screws into the gearbox: DETAIL "A" - MOTOR/GEARBOX WHEELCHAIRS Rear Position Approximately 65% of weight over drive wheels Middle Position Approximately 70% of weight over drive wheels Front Position Approximately 75% of weight over drive wheels DETAIL "B" - *GB WHEELCHAIRS Rear Position Approximately 65% of weight over drive wheels Middle Position Approximately 70% of weight over drive wheels Forward Position Not available with GB motors. FIGURE 2.1 Percentage of Weight Distribution Part No 1134791 33 3G Storm Series® Wheelchairs