JVC BR-DV6000U User Manual - Page 18
DV IN/OUT] terminal - power adapter
UPC - 046838325557
View all JVC BR-DV6000U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
NAMES AND FUNCTIONS OF PARTS - Rear panel - (continued) & VIDEO LINE Y/C COMPONENT IN R-Y B-Y Y OUT REMOTE2 IN OUT AUDIO CH 1/3 CH 2/4 IN MONITOR OUT SIGNAL GND DC12V IN SYNC IN DV IN/OUT OUT TIME CODE IN OUT OFF REC PLAY SERIAL REMOTE TIMER OUT MONITOR OUT REMOTE1 › fi DC power input terminal (2-PIN) This terminal is for inputting DC 12 V. Connect the DC power cord of the supplied AC adapter. Memo ● When power is supplied to this terminal, the OPERATE indicator located on the front panel lights up. (The indicator turns red when BRDV6000 is in the OPERATE OFF state) ● Whether to set BR-DV6000 to enter the OPERATE ON mode or OPERATE OFF mode when power is supplied to the terminal can be selected with DC IN MODE in the SYSTEM (2/2) Menu screen. ● If the ) TIMER switch on the rear panel is set to "REC" or "PLAY", recording or playback will be automatically started when power is supplied to the terminal. (Timer recording/ playback) & [SIGNAL GND] terminal This is the grounding terminal for signals. * DC power cord clamp Use this clamp to fasten the DC power cord. ( [DV IN/OUT] terminal This is the input/output terminal for IEEE1394compliant digital signals. It is for connecting to video equipment with a DV terminal. • To enable signal input via this terminal, set the INPUT SELECT switch located on the front panel to "DV". • Signals that come from this terminal are output regardless of the setting of the INPUT SELECT switch. • If REPLICATION of the SYSTEM (2/2) Menu is set to DV, the REC command is output from this terminal when BR-DV6000 begins playback. (REPLICATION mode) • Set PB/DV IN in the SYSTEM(2/2) Menu screen according to the signal format to be input to this terminal. (NTSC or PAL) 18 ‹ ) [TIMER] recording/playback switch This switch is for setting BR-DV6000 to start timer recording or timer playback when power is supplied to the ^ DC power input terminal according to an external timer. OFF : No timer recording or timer playback. REC : When power is supplied, BR-DV6000 starts recording automatically. (Timer recording) PLAY : When power is supplied, BR-DV6000 starts playback automatically. (Timer playback) Memo ● If the TIMER switch is set to "REC" or "PLAY", BR-DV6000 automatically enters the OPERATE ON mode upon DC power on even when DC IN MODE in the SYSTEM (2/2) Menu screen is set to "OPE OFF". ⁄ [SERIAL REMOTE IN] terminal (mini jack) This terminal is for connecting to the serial re- mote controller RM-G30 (sold separately). To operate BR-DV6000 with this terminal, per- form the following settings. • Set REMOTE SEL SER in the REMOTE (1/2) Menu screen to "ON" or "LOC+REM." ON : When the 4 REMOTE / LOCAL switch on the front panel is set to "REMOTE", this terminal becomes effective. LOC+REM: This terminal is effective regardless of the setting of the 4 REMOTE / LOCAL switch on the front panel. Memo ● To use this terminal as the foot switch input, set FOOT SW in the REMOTE (2/2) Menu screen. (☞ Page 77)