JVC DLA-HD10KSU DLA-HD10K Owner's Manual (50 pages) - Page 18

Installing the Projector, Precautions for Installation

Page 18 highlights

Installing the Projector Precautions for Installation Please read the following carefully when installing this unit. Installation Environment This unit is a precision device. Do not install it at the following places. Doing so may cause fire or malfunction of the unit. ● Where there is water, humidity or dust ● Where the unit may be subjected to oily or cigarette smoke ● On a soft surface such as carpet or cushion ● Where the unit may be subjected to high temperature due to direct sunlight ● When temperature is high or low Allowable operation temperature range: +5 f to +35 f Allowable relative humidity range: 20 % to 80 % (no condensation) Allowable storage temperature range: -10 f to +60 f ● Any room in which there is cigarette smoke or grease Even where smoke and grease levels are minimal, prolonged exposure will affect this unit. This unit emits heat and optical components are cooled down by taking in a large amount of air. The optical path may be soiled by grease/dirt, thus causing images to become dark or color projection to deteriorate. When soiling on the optical components occurs, removal of grease/dirt totally will not be possible. Precautions for Usage This unit makes use of a light source lamp that may reach a high temperature during projection. Do not allow projection under the following conditions. Doing so may cause fire or malfunction of the unit. ● Projection with the unit laid on its sides ● Projection with the unit installed in an unreasonable angle Avoid using this unit at an angle of more than ؓ5 Њ horizontally and ؓ25 Њ vertically. Doing so may cause unevenness in the color or shorten the lamp life. ● Projection at a location that blocks the air inlets or exhaust vents ● Projection at a place exposed to air blasts from an airconditioner Minimum Space Required 150 mm and above 300 mm and above 150 mm and above 300 mm and above Do not use a cover which may enclose this unit or block the air inlets/exhaust vents. Allow sufficient space around this unit. When this unit is enclosed in a space of dimensions as indicated on the left, use an air-conditioner so that internal and external temperatures are the same. 500 mm and above 18

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50

18
Installing the Projector
Please read the following carefully when installing this unit.
Minimum Space Required
Precautions for Installation
Installation Environment
Precautions for Usage
This unit is a precision device. Do not install it at
the following places. Doing so may cause fire or
malfunction of the unit.
Where there is water, humidity or dust
Where the unit may be subjected to oily or cigarette
smoke
On a soft surface such as carpet or cushion
Where the unit may be subjected to high temperature
due to direct sunlight
When temperature is high or low
Allowable operation temperature range: +5
f
to +35
f
Allowable relative humidity range: 20 % to 80 % (no
condensation)
Allowable storage temperature range:
-
10
f
to +60
f
Any room in which there is cigarette smoke or grease
Even where smoke and grease levels are minimal,
prolonged exposure will affect this unit. This unit emits
heat and optical components are cooled down by taking
in a large amount of air. The optical path may be soiled
by grease/dirt, thus causing images to become dark or
color projection to deteriorate. When soiling on the
optical components occurs, removal of grease/dirt totally
will not be possible.
This unit makes use of a light source lamp that
may reach a high temperature during projection.
Do not allow projection under the following
conditions. Doing so may cause fire or
malfunction of the unit.
Projection with the unit laid on its sides
Projection with the unit installed in an unreasonable
angle
Avoid using this unit at an angle of more than
±
5
²
horizontally and
±
25
²
vertically. Doing so may cause
unevenness in the color or shorten the lamp life.
Projection at a location that blocks the air inlets or
exhaust vents
Projection at a place exposed to air blasts from an air-
conditioner
Do not use a cover which may enclose this unit
or block the air inlets/exhaust vents. Allow
sufficient space around this unit. When this unit
is enclosed in a space of dimensions as
indicated on the left, use an air-conditioner so
that internal and external temperatures are the
same.
300 mm and
above
500 mm
and above
300 mm and
above
150 mm and
above
150 mm and above