JVC DLA-VS4500 Instruction Manual - Page 36
Whole Adjust Fine Operation Procedure, V Vertical, H Horizontal, Fine Window, Adjustment Pattern
View all JVC DLA-VS4500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Whole Adjust (Fine) Operation Procedure For making general adjustments on the misalignment of the entire screen using "Adjust (Pixel)", followed by making fine adjustments. A Set "Adjust Area" to "Whole" B Select "Adjust Color" and "Adjust Pattern Color" C Select Adjust (Fine), and press the [OK] button 0 The Adjustment mode is activated, and the selected adjustment pattern and Fine window are displayed. 0 The adjustable range may be smaller depending on the pixels being adjusted on the entire screen. Adjustment Pattern V (Vertical) Adjust/Set Fine Window Pixel Adjust Whole Adjust (Fine) Red H 0 (0 / 0) V 0 (0 / 0) Color A. Adjust. Color P. A. Area GAMMA COLOR TEMP LENS AP. PIC. ADJ. Back BACK H (Horizontal) . D Use the [JKH I] keys to move and adjust the vertical and horizontal pixels of the entire zone 0 The adjustment setting appears at the center of the Fine window. Pixel Adjustment Setting Pixel Adjust Whole Adjust (Fine) Red H 0 (0 / 0) V 0 (0 / 0) Color for Adjustment Color A. Adjust. Color P. A. Area GAMMA COLOR TEMP LENS AP. PIC. ADJ. Back BACK Remote Control Operation Guide Adjustment Setting H -20 ( -20 / -20) V 5 ( 5 / 5) Indicates the maximum and minimum misalignment value of the entire screen.(Max. / Min.) . E After adjustment is complete, press the [BACK] button twice to exit the Adjustment mode MEMO 0 If both the maximum overall screen misalignment of H (horizontal direction) and V (vertical direction) are "31", you cannot select a value that is larger than the displayed setting even when the adjustment setting is lower than the maximum value. 0 If the minimum overall screen misalignment is "-31", you cannot select a value that is smaller than the displayed setting even when the adjustment setting is higher than the minimum value. 36