JVC DLA-VS4500 Instruction Manual - Page 40
Edge Blending, Guide, Position Select, Start/End, Black Level, Installation Style, Adjust/Set
View all JVC DLA-VS4500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Edge Blending Corrects the seam between the images during projection by multiple projectors. * This function is disabled when "Picture Mode" is set to "Dynamic". Edge Blending For setting the function to On or Off. Setting Off On Description Disables the Edge Blending function. Enables the Edge Blending function. Guide For setting the guideline display (start point: green; end point: red). Setting Off On Hides the guideline. Displays the guideline. Description Position Select For setting the compensation position. Top Bottom Left Right Setting Description For setting the start and end points using the Start/End item. Start/End For setting the start and end points of the compensation position selected in "Position Select". 0 Setting range: 0 to 255 (left/right), 0 to 135 (up/down) Black Level For adjusting the black level. 0 Setting range: 0 to 50 Installation Style For setting to "Front", "Ceiling Mount (F)", "Rear", or "Ceiling Mount (R)" according to the installation status of the projector. 0 "Front" or "Ceiling Mount (F)" is set when projector is installed in the front with respect to the screen. 0 "Rear" or "Ceiling Mount (R)" is set when projector is installed in the rear with respect to the screen. Adjust/Set 40