JVC DR-M100S Instruction Manual - Page 33

BASIC OPERATIONS ON DVD DECK EN 33 Adjusting The Picture Quality CANCEL ENTER S ON SCREEN 0-9 Selection Keys (FGDE) I T CLEAR (o) Time Search You can play back a disc from the desired point by specifying the elapsed playing time from the beginning of a programme (DVD-RAM, DVD-R, DVD-RW and DVD VIDEO) or a disc (Video CD/SVCD and Audio CD). 1 Press ON SCREEN twice to access the on-screen bar. 2 Press selection keys to select Aj9B, then press ENTER. The pop-up window appears under the selected item. DVD-VIDEO CINEMA AUTO 1 TIME :: ENTER 3 Press the number keys to enter the desired title or chapter number, then press ENTER. Playback starts from the specified time. Example: To play back from a point 12 (minutes): 50 (seconds) elapsed. TIME TIME TIME TIME Press 1 Press 5 TIME Press 2 Press 0 If you have specified a wrong number Press CLEAR(o) or CANCEL on the remote control and re-enter again. To clear the on-screen bar Press ON SCREEN. NOTES: ● When A7B is displayed on the TV screen in step 3, you have selected a point that exceeds the recording time of the disc. ● Some DVD VIDEO discs do not contain time information, and it is not possible to use the Time Search function. In such cases, A7B is displayed on the TV screen as well. ● This function is not possible for a Video CD/SVCD with PBC function. You can obtain optimal picture quality by selecting an appropriate picture mode. 1 Press ON SCREEN twice to access the on-screen bar. 2 Press selection keys to select A B, then press ENTER. The pop-up window appears under the selected item. DVD-VIDEO CINEMA AUTO 1 NORMAL CINEMA SHARP SOFT 3 Press selection keys to select the desired option, then press ENTER. NORMAL: Normally select this. CINEMA: Suitable for a movie disc, etc. SHARP: Clearer, sharper-edged picture when viewing images with lots of flat, same-coloured surfaces such as cartoons. SOFT: Select this option when too much noise appears. To clear the on-screen bar Press ON SCREEN. Setting The Progressive Mode You can obtain optimal picture quality by selecting whether the content on the disc is processed by field (video source) or by frame (film source). 1 Set the unit to the progressive scan mode. (A pg. 64) 2 Press ON SCREEN twice to access the on-screen bar. 3 Press selection keys to select A B, then press ENTER. The pop-up window appears under the selected item. DVD-VIDEO SHARP AUTO 2 AUTO 1 AUTO 2 FILM VIDEO 4 Press selection keys to select the desired option, then press ENTER. AUTO 1: This mode automatically detects film and video content for progressive playback. When film content is found, flag detection is used to invoke playback of film data in full screen. When video content is found, pictures from multiple fields are used to detect sections with movement, and then this movement undergoes advanced image processing for output of sharp, detailed progressive images without any reduction in image quality where movement occurs. Normally, operation in this mode is recommended. AUTO 2: Only the processing of sections with movement differs from AAUTO 1B. For video contents, the sections with movement are detected and the pictures are corrected by the filtering process for motion pictures. FILM: Suitable for playing back a progressive scanned film source disc.