JVC DR-M100S Instruction Manual - Page 64
Scan Mode Set, Tray Lock, Child Lock, SUBSIDIARY SETTINGS
View all JVC DR-M100S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
64 EN SUBSIDIARY SETTINGS Scan Mode Set If you connect the unit and TV with Component Video Connection (A pg. 11), you can select the scan mode from two modes: Interlaced scan mode which is used in the conventional TV system, and Progressive scan mode which enables reproduction of higher-quality images. 8 Interlaced scan In the conventional video system, a picture is shown on the display monitor in two halves. The Interlaced scan system places lines of the second half of the picture in-between lines of the first half of the picture. 8 Progressive scan Progressive scan displays all the horizontal lines of a picture at one time, as a single frame. This system can convert the interlaced video from DVD into progressive format for connection to a progressive display. It dramatically increases the vertical resolution. ATTENTION: ● Your TV needs to be compatible with Progressive. ● Connect the unit and the TV using a component video cable. ● Turn on the unit. ● Turn on the TV and select an input mode such as EXT1. Tray Lock You can lock the disc tray to prohibit the unwanted disc ejection by children. M o RAM/RW To lock tray When the unit is turned off, while holding o, press M on the unit. ALOCKB appears on the front display panel and the disc tray is locked. To unlock tray When the unit is turned off, while holding o, press M on the unit. AUNLOCKB lights up on the front display panel. Child Lock You can disable the operations of this unit using the Child Lock function. ● Turn on the unit. 1 When the unit is turned on, press and hold DVD A on the remote control for more than 10 seconds. ● The unit turns off and enters into Child Lock mode. ● When in Child Lock mode, ACLB will appear on the front display panel indicating that Child Lock mode is engaged when an attempt was made to operate buttons on the unit or remote control. 2 Press and hold DVD A on the remote control for 10 or more seconds. ● Child Lock is released and the unit turns on. When in Child Lock mode, pressing TIMERj on the remote control during timer recording releases Child Lock and recording is continued. PROGRESSIVE SCAN 1 Set AL-1 OUTPUTB to ACOMPONENTB. (A pg. 58) 2 Press PROGRESSIVE SCAN for 3 or more seconds. ● Video output indicator (q) lights on the front display panel if Progressive scan mode has been established. (A pg. 13) ● Each press of PROGRESSIVE SCAN for 3 or more seconds switches the scan mode. NOTES: ● Progressive scan video signal is output from the [COMPONENT VIDEO OUT] connectors. ● Interlaced scan mode is the setting at your purchase. ● Interlaced scan mode might be suitable depending on video material. ● Scan mode cannot be set while menu screen is displayed.