JVC DR-M100S Instruction Manual - Page 61

Mode Set ● Turn on the unit. ● Turn on the TV and select an input mode such as EXT1. Selection Keys (FGDE) ENTER SET UP AUDIO Various modes of this unit are categorised into menus nested in 2 levels shown in the following table. To change the settings of these modes, find the desired mode in the menu, then follow the procedure below. (For details on each menu, see pages 61 - 62) DVD SET UP LANGUAGE SET (A pg. 21) AUDIO OUTPUT (A pg. 61) UTILITY (A pg. 70, 71) FUNCTION SET UP VIDEO IN/OUT (A pg. 22, 58) RECORDING SET (A pg. 62) DISPLAY SET (A pg. 62) OTHERS (A pg. 63) INITIAL SET UP AUTO CH SET (A pg. 19, 66) MANUAL CH SET (A pg. 67) GUIDE PR (A pg. 65) CLOCK SET (A pg. 69) ● The procedure below shows how to set the desired option of the AAUDIO RECB mode as an example. 1 Press SET UP to access the Main Menu screen. 2 Press selection keys to select AFUNCTION SET UPB, then press ENTER. 3 Press selection keys to select ARECORDING SETB, then press ENTER. 4 Press selection keys to select AAUDIO RECB, then press ENTER. DVD SET UP FUNCTION SET UP INITIAL SET UP VIDEO IN/OUT RECORDING SET DISPLAY SET OTHERS SAVE AS LIBRARY XP MODE REC AUDIO AUDIO REC DIRECT REC ON DOLBY DIGITAL NICAM1/MAIN NICAM1/MAIN NICAM2/SUB MONO 5 Press selection keys to SET UP select the desired EXIT setting, then press OK SELECT SELECT WITH [CURSORS] THEN PRESS [ENTER] ENTER. 6 Press SET UP to complete the setting. SUBSIDIARY SETTINGS EN 61 * The boldface settings below indicate the settings at your purchase. AUDIO OUTPUT 8 DIGITAL AUDIO OUT ^ DOLBY DIGITAL/PCM / STREAM/ PCM / PCM ONLY Set to the appropriate mode according to the type of the device connected to [DIGITAL AUDIO OUT] connector. DOLBY DIGITAL/PCM: Select this when you connect the digital input connector of a Dolby Digital Decoder or an amplifier with a built-in Dolby Digital Decoder. STREAM/PCM: Select this when you connect the digital input connector of an amplifier with a built-in DTS, Dolby Digital, or MPEG multichannel decoder. PCM ONLY: Select this when you connect the linear PCM digital input of other audio equipment (amplifier, MD or DAT deck, etc.). NOTE: If you watch or play back a programme recorded on a DVD-RAM or DVD-RW (VR mode only) disc which contains multiple audio languages, select APCM ONLYB in advance and choose main or sub audio with AUDIO. 8 ANALOG AUDIO OUT ^ STEREO / DOLBY SURROUND Select the appropriate setting to accommodate the unit to the connected A/V equipment. This function takes effect when a DVD VIDEO disc is played back. STEREO: Select this when listening to conventional two-channel stereo audio with the unit's [AUDIO OUT] connectors connected to a stereo amplifier/receiver or TV set, or in case you want to record the audio from a DVD VIDEO disc to a Mini Disc, etc. DOLBY SURROUND: Select this when listening to audio with the unit's [AUDIO OUT] connectors connected to an amplifier/receiver with a built-in surround decoder or a surround decoder. 8 D. RANGE CONTROL ^ NORMAL / WIDE RANGE / TV MODE The dynamic range (the difference between the loudest sound and the quietest one) can be compressed during playback of a programme encoded in Dolby Digital format. This function takes effect when a DVD VIDEO disc recorded in Dolby Digital format is played back at low or middle volume. NORMAL: Normally select this setting to activate this function. WIDE RANGE: Select this to deactivate this function when you enjoy wide dynamic range programme. TV MODE: Select this when connecting to a TV. Even soft sound can be well heard. NOTES: ● This function has no effect on programmes other than those recorded in Dolby Digital format. ● The effect of ANORMALB and AWIDE RANGEB may not be different depending on discs. 8 OUTPUT LEVEL ^ STANDARD / LOW You can lower the output level of analogue audio to accommodate the unit to the connected A/V equipment. STANDARD: Normally select this setting. LOW: The output level of analogue audio is lowered.