JVC DVL720U Instruction Manual - Page 52
Dubbing Still Images Recorded On A Tape, To A Memory Card
UPC - 046838160783
View all JVC DVL720U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
52 EN SNAPSHOT Button Power Switch Lock Button Display Menu Screen COPY - OF F ON SP 46 MENU/BRIGHT Play/Pause Button (4/6) Wheel DUBBING (cont.) Dubbing Still Images Recorded On A Tape To A Memory Card (GR-DVL720/DVL520 only) Still images can be dubbed from a tape to a memory card. 1 Load a memory card (੬ pg. 14) and cassette (੬ pg. 12). 2 Set the VIDEO/MEMORY Switch to "VIDEO", then set the Power Switch to "PLAY" while pressing down the Lock Button. 3 Press the MENU/BRIGHT wheel in. The Menu Screen appears. Rotate it to select " VIDEO" and press it. The VIDEO Menu appears. 4 Rotate the MENU/BRIGHT wheel to select " COPY" and press it. The Sub Menu appears. Rotate it to select "ON" and press it. Selection is complete. 5 Rotate the MENU/BRIGHT wheel to select " RETURN" and press it twice. The normal playback screen reappears. 6 To select a video image to be dubbed, start playback by pressing 4/6. At the moment you find the image you wish to dub, press it again to engage Still Playback. 7 To start dubbing, press SNAPSHOT. The selected image is stored on the memory card. • " " blinks during dubbing. NOTES: ● If SNAPSHOT is pressed in step 7 when a memory card is not loaded, the message "COPYING FAILED" is displayed. ● If an image recorded on the tape using the WIDE mode (੬ pg. 46) is dubbed to a memory card, the WIDE mode identifying signal is not dubbed with it. ● To use Playback Special Effects with a video image you wish to dub, perform up to step 7 using the remote control (provided with GR-DVL720 only) (੬ pg. 56). ● Images are dubbed in 640 x 480 pixels. VIDEO/MEMORY Switch (Open the LCD monitor to access this switch.)