JVC DVL720U Instruction Manual - Page 74

User Maintenance

Page 74 highlights

74 EN After Use 1 Turn off the camcorder. 2 Slide and hold OPEN/EJECT in the direction of the arrow, then pull the cassette holder cover open until it locks. The cassette holder opens automatically. Remove the cassette. 3 Press "PUSH HERE" to close the cassette holder. • Once the cassette holder is closed, it recedes automatically. Wait until it recedes completely before closing the cassette holder cover. 4 Tilt the viewfinder upward 1. Press BATT. RELEASE 2 and remove the battery pack 3 . Cassette holder Remove. USER MAINTENANCE Cleaning The Camcorder 1 To clean the exterior, wipe gently with a soft cloth. Put the cloth in diluted mild soap and wring it well to wipe off heavy dirt. Then wipe again with a dry cloth. 2 Press PUSH OPEN and open the LCD monitor. Wipe gently with a soft cloth. Be careful not to damage the monitor. Close the LCD monitor. 3 To clean the lens, blow it with a blower brush, then wipe gently with lens cleaning paper. 4 To clean the viewfinder, raise it to the vertical position. Open the viewfinder cleaning hatch in the direction of the arrow 1. 5 Insert a lens blower or soft cloth into the gap at the bottom of the viewfinder and clean the interior of the viewfinder with it 2. 6 Close the hatch. Tilt the viewfinder back to the horizontal position. NOTES: ● Avoid using strong cleaning agents such as benzine or alcohol. ● Cleaning should be done only after the battery pack has been removed or other power units have been disconnected. ● Mold may form if the lens is left dirty. ● When using a cleaner or chemically treated cloth refer to the cautions of each product. OPEN/EJECT Switch PUSH HERE Cassette holder cover BATT. RELEASE Button 1 23 1 Hatch 2 Lens blower

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88

74
EN
Cleaning The Camcorder
1
To clean the exterior, wipe gently with a soft cloth.
Put the cloth in diluted mild soap and wring it well to
wipe off heavy dirt. Then wipe again with a dry cloth.
2
Press
PUSH OPEN
and open the LCD monitor.
Wipe gently with a soft cloth.
Be careful not to
damage the monitor.
Close the LCD monitor.
3
To clean the lens, blow it with a blower brush,
then wipe gently with lens cleaning paper.
4
To clean the viewfinder, raise it to the vertical
position. Open the viewfinder cleaning hatch in the
direction of the arrow
1
.
5
Insert a lens blower or soft cloth into the gap at
the bottom of the viewfinder and clean the interior of
the viewfinder with it
2
.
6
Close the hatch. Tilt the viewfinder back to the
horizontal position.
NOTES:
Avoid using strong cleaning agents such as benzine or
alcohol.
Cleaning should be done only after the battery pack
has been removed or other power units have been
disconnected.
Mold may form if the lens is left dirty.
When using a cleaner or chemically treated cloth refer
to the cautions of each product.
After Use
1
Turn off the camcorder.
2
Slide and hold
OPEN/EJECT
in the direction of
the arrow, then pull the cassette holder cover open
until it locks. The cassette holder opens automatically.
Remove the cassette.
3
Press “PUSH HERE” to close the cassette holder.
• Once the cassette holder is closed, it recedes
automatically. Wait until it recedes completely before
closing the cassette holder cover.
4
Tilt the viewfinder upward
1
. Press
BATT.
RELEASE
2
and remove the battery pack
3
.
USER MAINTENANCE
2
1
3
2
1
Cassette holder
cover
OPEN/EJECT Switch
PUSH HERE
Hatch
BATT. RELEASE Button
Remove.
Lens blower
Cassette
holder