JVC FS-G6 Instruction Manual - Page 23

English Continued 4 Press SET button to program the track number. Track number Program number Here the track number 2 on the CD is stored into a program number 1, and shortly after that the total playback time of programed tracks appears in the display window as follows: To modify the program Before playing back the CD, you can erase the last programed track by pressing CANCEL button. Each time you press the button, the last programed track is erased from the end of program. • To add new tracks to the program before you start playing-back, simply select a track number again you want to add (repeat steps 3 to 4). To erase all the programed data After playing back the CD, you can erase all the programed track data by pressing 7 (stop) button. New program can be entered again. Total playback time 5 Repeat steps 3 to 4 to program other tracks you want up to 32 tracks. • If you try to program a 33rd step "MEMORY FULL" will appear in the display window, and your entry is ignored. • The total playback time of programed tracks exceeds 99'59 will appear in the display window. To exit from the Program play mode Before or during playback, you can exit from Program play mode as follows: • Before playback, press PLAY MODE button twice. • During playback, press 7 (stop) button then PLAY MODE button twice. Playback mode indicator goes off and the system resumes Normal play mode. Pressing 0 (open/close) button to open the CD tray also quits and erases the program play. 6 Press 6 (play/pause) button on the CD unit. The programed tracks are played back in the order you have set. • Other CD operations are the same as Normal play. 7 Press 7 (stop) button to quit the Program play. • When Program play finished, CD unit automatically stops. To check the program contents Before playing back the CD, you can check the program contents by using 4 / ¢ button. Press ¢ button: Shows the programed tracks in the programed order. Press 4 button: Shows them in the reverse order. 18