JVC FS-G6 Instruction Manual - Page 33

English Using Sleep Timer Timer Priority With Sleep Timer, you can fall asleep to your favorite music or radio program. How Sleep Timer actually works The system automatically turns off after the selected time length passes while playing any source. On the remote control only: 1 Press SLEEP button on the remote control repeatedly to select the sleep timer. • Each time you press the button, the time length changes as follows: Since each timer can be set separately, you may wonder what happens if the setting for these timers overlaps. Here are the priorities for each timer. • Recording Timer has priority over Daily Timer and Sleep Timer. If Daily Timer is set to come on while Recording Timer is operating, Daily Timer will not come on at all. Recording Timer Daily Timer 6:00 6:30 7:00 7:30 10 20 30 60 90 120 (Canceled) 2 Wait for about 5 seconds after selecting the time length. When the sleep timer setting is completed, the display window dims and just shows the remaining time until the shut-off time minute by minute like "SLEEP 30" then "SLEEP 29". Does not work. If Recording Timer is set to come on while Sleep Timer is operating, Sleep Timer will be canceled several seconds before Recording Timer comes on. 6:00 6:30 7:00 7:30 Recording Timer Sleep Timer • To change the shut-off time, press SLEEP button repeatedly until the desired time length appears. • To cancel the setting, press SLEEP button repeatedly until the sleep timer indication disappears. Canceled. • Sleep Timer has priority over Daily Timer. If Daily Timer is set to come on while Sleep Timer is operating, Daily Timer will not come on at all. 6:00 6:30 7:00 7:30 Sleep Timer Daily Timer Does not work. Therefore, the equation is like this (high > low): Recording Timer > Sleep Timer > Daily Timer 28