JVC FS-G6 Instruction Manual - Page 28
Recording in Auto Reverse
View all JVC FS-G6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
English Continued REC indicator lights red to show the recording pause mode, and "TAPE REC" appears in the display window as follows, 6 Press 0 (open/close) button on the cassette deck unit to remove the tape. • Pressing 0 (open/close) button directly during recording , the cassette deck unit stops recording and opens the tape tray. Dolby B NR or Press DOLBY B NR button before recording to reduce frequency response noise. When the tape is played back later, also press the button with its lamp lit. To change the recording source You cannot change the selected source during the recording pause mode. To exit from the recording pause mode, press 7 (stop) button on the cassette deck unit. To make the blank tape Press AUX button to start recording without connecting nor playing back the external equipment. Recording in Auto Reverse 1 Select one of the recording sources - FM/AM broadcasts, CD, or other external equipments. 2 Make sure the tape side for recording meets the tape direction indicator 3 (forward). 4 Press Tape ` (playback) button for FM/AM broadcasts or 6 (play/pause) button on the CD unit to start recording. Tape direction indicator starts blinking slowly in the display window. REC Tape direction indicator REC reverse forward • Each time to press ` (playback) button or TAPE ` (playback) button on the remote control, you can change the tape direction to be recorded onto. 3 : Good, records onto the forward side. 2 : No good, records onto the reverse side. • To stop recording for a moment, press REC PAUSE button on the cassette deck unit. Tape direction indicator stops blinking in the display window. • To resume recording, press ` (playback) button again. Recording continues from the point where it was stopped for a while. 5 Press 7 (stop) button on the cassette deck unit for FM/AM broadcasts recording, or 7 (stop) button on the CD unit for the CD recording. Recording stops and REC indicator goes off in the display window. On CD recording, cassette deck unit will stop after leaving a non-recorded portion of 4 seconds. If you want to quit recording immediately, press 7 (stop) button on the cassette deck unit. • The recording in the auto reverse mode stops automatically after completing recording onto the 2 (reverse) direction side. Be sure to start recording from the 3 (forward) direction side. • When the auto reverse mode is set to off, recording stops after having recorded onto one side of the tape. 3 Press π (auto reverse) button on the cassette deck unit to set the reverse mode on. The auto reverse lamp lights orange on the front panel. 4 Press REC PAUSE button on the cassette deck unit. 5 Repeat the steps 4 to 5 of "Manual Recording onto a Tape" mentioned in the left column. 23