JVC GY-HD250U 117 page operator's manual for the GY-HD250U - Page 20

e_hd250.book Page 16 Tuesday, October 24, 2006 3:11 PM CONTROLS, INDICATORS AND CONNECTORS Left Side Section 98 7 1 2 3 CH2-AUDIO OUT-CH1 VIDEO IEEE 1394 0 6 5 4 1Viewfinder connector (6-pin) Connect the cable from the viewfinder here. • Set the image format for this terminal in VF SIGNAL on the LCD/VF[4/4] menu screen. X See page 92. 2[CH-2 INPUT] CH-2 audio input connector selector switch Selects the CH-2 audio input connector. INPUT1 INPUT2 : Inputs the audio from the INPUT1 connector 4 into CH-2. : Inputs the audio from the INPUT2 connector 4 into CH-2. MEMO The audio from the INPUT1 connector is also input into CH-1 regardless of the setting. 3[AUDIO INPUT] Audio input signal selector switch This switch is used to select the input sound signal from INPUT1 or INPUT2 connector. LINE : Set to this position when connected to audio equipment, etc. The reference input level is +4 dBs. MIC : Set to this position when the dynamic micro- phone is connected. MIC+48V : Set to this position when a microphone requiring +48 V power supply (phantom microphone, etc.) is connected. CAUTION When connecting a component that does not require +48 V power supply, make sure that the switch is not set to MIC+48V before the component is connected. MEMO You can select the normal input level for MIC and MIC+48V in the INPUT1, 2 MIC REF. item on the AUDIO/MIC[1/2] menu screen. X See page 87. 4[INPUT1/INPUT2] INPUT1/INPUT2 audio input connectors These are audio input connectors for connecting to an external audio device or microphone. • Set the [AUDIO INPUT] switch 3 according to the device to be connected. • Set the CH-2 audio input connector using the [CH-2 INPUT] switch 2. The CH-2 audio from the set connector is recorded. 5Shoulder pad slide button Button to adjust the position of the shoulder pad. When you press this button, you can move the position of the shoulder pad 6 forward or backward. 6Shoulder pad 7Cassette cover Sliding the EJECT switch a on page 18 located on the top section opens this cover to allow insertion or removal of the videocassette. CAUTION To prevent foreign objects from entering the internal parts of the VTR unit, do not leave this device with the cover open for extended periods of time. 8[VIDEO OUT] Video output terminal (RCA) This is a terminal for composite video signal output. • Select whether or not to output a signal with setup in SET UP on the VIDEO FORMAT[2/2] menu screen. (Only for U model) 9[AUDIO OUTPUT CH-1/CH-2] Audio output connector (RCA) Output connector for audio signals. • Outputs the input audio signal in the Camera mode. • Outputs the playback audio signal in the VTR mode. • When a HDV/DV signal (IEEE1394) is input, the EE sound of the input audio signal is output in the VTR mode. MEMO Alarm sound is not output. 0[IEEE1394] IEEE1394 connector (6-pin) Using an IEEE1394 cable (optional), a digital video component with IEEE1394 connector can be connected here. X See "Connecting the IEEE1394 Cable" on page 64. X See "HDV/DV Dubbing" on page 68. CAUTION When connecting the IEEE1394 cable, confirm that the connector is facing the right direction before inserting. X See page 64. MEMO Put the covers on the connectors when you are not using them. 16