JVC GY-HD250U 117 page operator's manual for the GY-HD250U - Page 23
FULL AUTO] Full auto shooting FAS switch
UPC - 046838027383
View all JVC GY-HD250U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
e_hd250.book Page 19 Tuesday, October 24, 2006 3:11 PM d[MONITOR SELECT] Audio monitor selector switch This switch is used to select the monitor sound output and playback sound output from the monitoring speaker 1 on page 14 or the PHONES jack 2 on page 12. CH-1 : The CH-1 channel audio is output. BOTH : CH-1 and CH-2 channel audio are output mixed. When this setting is selected, the menu screen can be used to select whether the mixed sound or stereo sound should be output via the PHONES jack. (AUDIO MONITOR item on the AUDIO/MIC[2/2] menu screen) When AUDIO MONITOR item on the AUDIO/ MIC[2/2] menu screen is set to "STEREO", only the audio of CH-1 is output from the monitoring speaker. CH-2 : The CH-2 channel audio is output. X See "Outputting Audio" on page 63. X See "AUDIO/MIC[2/2] Menu Screen" on page 88. CAUTION Make sure to move switches all the way. Do not leave a switch stopped in a midway position. Noise will be generated and operation irregularities will occur. e[DISPLAY] Display button • When LCD+VF in the LCD/VF[4/4] menu display is set to OFF, press the DISPLAY button for 2 seconds to switch between the LCD screen and the viewfinder screen. • When LCD+VF in the LCD/VF[4/4] menu display is set to ON, press the DISPLAY button for 2 seconds to switch the LCD screen ON and OFF. Press the DISPLAY button briefly to change the display mode for the LCD screen as follows. Only image displayed Characters shown enlarged Image and characters displayed X See "Magnified Status Indications on the LCD Monitor" on page 29. f[VTR] VTR indicator This indicator lights when the camera is in the VTR mode. To perform VTR playback or to input the HDV/DV signal from the IEEE1394 connector 0 on page 16, press the CAM/VTR button 5 on page 13 to turn on this indicator. It flashes when the mode is being changed. g[FULL AUTO] Full auto shooting (FAS) switch This is the ON/OFF switch for FAS mode. • During FAS mode, "FAS" is displayed on the LCD monitor or the viewfinder. • FAS mode works together with the auto iris and auto level control (ALC) modes and automatically adjusts to the optimal video signal level and white balance. • You can select automatic adjustment mode or manual adjustment mode for audio recording level. X See "AUDIO/MIC[2/2] Menu Screen" on page 88. • Even if there are color bars, this automatically sets to camera video. • Auto iris mode operates even if the lens iris mode switch is set to the manual position. • The gain changes continuously until it reaches the maximum ALC MAX setting, and the shutter speed also changes continuously. • When you release FAS mode, all of the settings return to their previous modes. CAUTION When the power is turned on while the camera is in the FAS mode, it takes about 10 seconds before the automatic adjustment of FAS is completed. All of the previous setting contents are recalled when the FAS mode is cancelled. h[STOP] Stop button Press to enter the stop mode. i[REW] Rewind button Press this button to rewind the tape. • Pressing this button in the stop or fast forward mode ini- tiates the rewind mode. (Only for VTR mode) • Pressing this button during playback, still picture play- back or forward search initiates reverse search. j[PLAY/STILL] Play/still button Press to start playback. Press to enter the still picture mode during playback, in the stop mode or in the search mode. Depending on the ambient temperature, if still image playback mode continues for between 30 seconds and 3 minutes, it stops automatically. (Tape protect mode) During still picture playback and search mode, press this button to return to the normal playback mode. * If the auto tracking is active at the moment the play mode is entered, the playback video will be interfered with digital noise. k[FF] Fast forward button Press this button to fast forward the tape. • Pressing this button in the stop or rewind mode initiates the fast forward mode. (Only for VTR mode) • Pressing this button during playback, still picture playback or reverse search initiates forward search. lScrew holes for mounting accessories You can mount lights and other accessories. 19