JVC HM700U Instruction Manual - Page 49

Audio Monitor During Recording, Audio Monitor]

Get JVC HM700U - Camcorder - 1080p PDF manuals and user guides View all JVC HM700U manuals
Add to My Manuals
Save this manual to your list of manuals

Page 49 highlights

Note : ● When the [FULL AUTO] switch on the camera recorder is set to AONB, the recording level cannot be adjusted with the [AUDIO LEVEL CH-1/CH-2] adjustment knob. ⅥAutomatic Adjustment Mode Set the [AUDIO SELECT CH-1/CH-2] switch on the camera recorder to AAUTOB or the [FULL AUTO] switch to AONB to enter Automatic Adjustment Mode. The audio recording level is set automatically according to the input level. When the [FULL AUTO] switch is set to AONB, mode switching with the [AUDIO SELECT CH-1/CH-2] switch is disabled. Memo : ● When [Audio] in the [Camera Function]B[FULL AUTO...] menu is set to ASW SetB, you can switch the recording level mode with the [AUDIO SELECT CH-1/CH-2] switch on the camera recorder even if the [FULL AUTO] switch is set to AONB. (A Page 75) ⅥUsing Stereo Type Earphone Jack When a stereo type earphone jack is connected, perform the following setting to output stereo sound. 1 Set the [MONITOR SELECT] switch to ABOTHB. 2 Set [Main Menu]B[A/V Out]B[Audio Monitor] to AStereoB. (A Page 87) Only audio from [CH-1] is output through the monitor speaker. Memo : ● You can set the volume of the alarm tone with [Alarm Level] in the [Main Menu]B[Others] menu. (AOffB/ALowB/AMiddleB/ AHighB) (A Page 87) Audio Monitor During Recording You can check the input audio with the monitor speaker or earphones. 1 Select the channel to monitor with the [MONITOR SELECT] switch. [CH-1] [BOTH] [CH-2] Outputs audio from [INPUT1] terminal. Mixes and outputs audio from both [INPUT1/INPUT2] terminals. Outputs audio from [INPUT2] terminal. 2 Adjust the volume of the monitor audio with the [MONITOR] adjustment knob. Monitor Speaker [PHONES] Terminal [MONITOR] Adjustment Knob [MONITOR SELECT] Switch Memo : ● Alarm tone is output when there is an abnormality in the camera recorder. Alarm tone is also output when the SDHC card is full or when the battery is low. Note : ● Increasing the volume of the monitor too much may result in howling of the camera microphone. 45

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
45
Note :
●
When the [FULL AUTO] switch on the camera recorder is set
to
A
ON
B
, the recording level cannot be adjusted with the
[AUDIO LEVEL CH-1/CH-2] adjustment knob.
±
Automatic Adjustment Mode
Set the [AUDIO SELECT CH-1/CH-2] switch on the camera
recorder to
A
AUTO
B
or the [FULL AUTO] switch to
A
ON
B
to
enter Automatic Adjustment Mode. The audio recording level
is set automatically according to the input level.
When the [FULL AUTO] switch is set to
A
ON
B
, mode
switching with the [AUDIO SELECT CH-1/CH-2] switch is
disabled.
Memo :
●
When [Audio] in the [Camera Function]
B
[FULL AUTO...]
menu is set to
A
SW Set
B
, you can switch the recording level
mode with the [AUDIO SELECT CH-1/CH-2] switch on the
camera recorder even if the [FULL AUTO] switch is set to
A
ON
B
. (
A
Page 75)
Audio Monitor During Recording
You can check the input audio with the monitor speaker or
earphones.
1
Select the channel to monitor with the [MONITOR
SELECT] switch.
2
Adjust the volume of the monitor audio with the
[MONITOR] adjustment knob.
Memo :
●
Alarm tone is output when there is an abnormality in the
camera recorder. Alarm tone is also output when the SDHC
card is full or when the battery is low.
Note :
●
Increasing the volume of the monitor too much may result in
howling of the camera microphone.
±
Using Stereo Type Earphone Jack
When a stereo type earphone jack is connected, perform the
following setting to output stereo sound.
1
Set the [MONITOR SELECT] switch to
A
BOTH
B
.
2
Set [Main Menu]
B
[A/V Out]
B
[Audio Monitor] to
A
Stereo
B
. (
A
Page
8
7)
Only audio from [CH-1] is output through the monitor
speaker.
Memo :
●
You can set the volume of the alarm tone with [Alarm Level]
in the [Main Menu]
B
[Others] menu. (
A
Off
B
/
A
Low
B
/
A
Middle
B
/
A
High
B
) (
A
Page 87)
[CH-1]
Outputs audio from [INPUT1] terminal.
[BOTH]
Mixes and outputs audio from both [INPUT1/INPUT2]
terminals.
[CH-2]
Outputs audio from [INPUT2] terminal.
[MONITOR]
Adjustment Knob
[MONITOR SELECT]
Switch
Monitor
Speaker
[PHONES]
Terminal