JVC HM700U Instruction Manual - Page 50
Setting Time Code and User’s Bit, Time Code Operation Mode, Shooting
![]() |
View all JVC HM700U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Shooting Setting Time Code and User's Bit Time code and user's bit data are recorded with the video in this camera recorder. The time code and user's bit are displayed on the viewfinder and LCD screens during playback or recording. (Status screen) Displaying Time Code and User's Bit The time code and user's bit are displayed on the viewfinder and LCD screens during playback or recording. The display differs according to the menu settings. 1 Set [Main Menu]B[LCD/VF]B[Status Display...]B[TC/ UB] to AOnB. (A Page 85) Time code or user's bit data is displayed on the status screen. Time Code or User's Bit 1280x720 30/24 fps 24p HQ 00:00:00:00 A 100min B 100min STBY 282min MAX 123% MIN 45% SKIN AREA S.DTL B -3 ND1/16 A STATUS 1 Screen 2 Select the display with the [TC DISPLAY] switch on the LCD monitor. Select time code display (TC) or user's bit display (UB). Memo : ● The built-in time code generator number is displayed. ● Time code display for [IEEE1394] input is not supported. ● Values recorded on the SDHC card is displayed in Media mode. Setting Display LCD/VF Display VIDEO Output Display TC Time When [Main Menu]B[LCD/ When [Analog Out Code VF]B[Status Display...]B[TC/ Char.] or [SDI Out UB User's Bit UB] is set to AOnB, time code Char.] in the [A/V or user's bit is displayed Out] menu is set to during the following status display and information AOnB, time code or user's bit is display mode of the LCD displayed in the screen. respective video Ⅵ STATUS 1 Screen in Camera mode output images during the LCD/VF display setting on Ⅵ STATUS 1, STATUS 2 Screens in Media mode (SD) the left. Time Code Operation Mode Three types of time code operation can be selected with the [TC GENE.] switch. They are AFREEB, ARECB, and AREGENB. Setting Mode Description FREE FreeRun mode The time code operates in the run mode at all times regardless of the recording status. It continues to run even when the power of the camera recorder is turned off. * REC RecRun mode The time code operates in the run mode during recording. It continues to run in the order of the recorded clips as long as the SDHC card is not replaced. If the SDHC card is removed and recording is made on another card, time code will be recorded on the new card from where it was left off in the previous card. REGEN Regen mode The time code operates in the run mode during recording. When the SDHC card is replaced, the last time code recorded on the card is read and recorded on a new card so that the time code continues in running order. (A Page 49) * When [Rec Mode] in the [Record Set] menu is set to AVariable FrameB, time code operation enters RecRun mode. [TC DISPLAY] Setting Switch [TC GENE.] Setting Switch 46
![](/manual_guide/products/jvc-hm700u-instruction-manual-4b2acd0/50.png)