JVC KD PDR40 Instructions - Page 13

ENGLISH Indication, [Range] LOUD*4 (loudness), [LOUD ON or LOUD OFF] Boost low and high frequencies to produce a well-balanced sound at a low volume level. SUBWOOFER*1, [00 to 08, initial: 04] Adjust the subwoofer output level. VOL ADJ (volume adjust), [-05 to +05, initial: 00] Adjust the volume level of each source (except FM), in relation to the FM volume level. The volume level will automatically increase or decrease when you change the source. • Before making an adjustment, select the source you want to adjust. VOLUME, [00 to 50 or 00 to 30]*5 Adjust the volume. *1 Displayed only when "L/O MODE" is set to "SUB.W" (see page 15). *2 If you are using a two-speaker system, set the fader level to "00." *3 This adjustment will not affect the subwoofer output. *4 The adjustment made (LOUD ON/LOUD OFF) will be applied to all sound modes. *5 Depending on the amplifier gain control setting. (See page 15 for details.) Storing your own sound mode You can adjust the sound modes and store your own adjustments in memory. 1 Select a sound mode. 2 Enter the adjustment mode. • If no operation is done within 5 seconds, this mode is canceled. 3 Select a sound characteristic. 4 Adjust the sound elements of the selected sound characteristic. 1 Adjust the frequency. 2 Adjust the level. 3 Adjust the quality slope (Q). Sound elements Range/selectable items BASS MID TRE Frequency 60 Hz 80 Hz 100 Hz 120 Hz 500 Hz 1.0 kHz 1.5 kHz 2.5 kHz 7.5 kHz 10.0 kHz 12.5 kHz 15.0 kHz Level -06 to -06 to -06 to +06 +06 +06 Q (Q-slope) Q0.5 Q0.75 Q0.75 Q1.0 Q1.0 Q1.25 Q1.5 Q1.25 Q2.0 Q1.5 BASS: Bass MID: Mid-range TRE: Treble 5 The adjustment made will be stored automatically. Repeat steps 3 and 4 to adjust other sound characteristics. 13