JVC KD PDR40 Instructions - Page 21

ENGLISH MP3/WMA playback Symptoms Remedies/Causes • Disc cannot be played back. • Use a disc with MP3/WMA tracks recorded in a format compliant with ISO 9660 Level 1, Level 2, Romeo, or Joliet. • Add the extension code or to the file names. • Noise is generated. Skip to another track or change the disc. (Do not add the extension code or to non-MP3 or WMA tracks.) • A longer readout time is required ("READING" Do not use too many hierarchical levels and folders. keeps flashing on the display). • Tracks do not play back in the order you have The playback order is determined when the files are intended them to play. recorded. • The elapsed playing time is not correct. This sometimes occurs during playback. This is caused by how the tracks are recorded on the disc. • The correct characters are not displayed (e.g. This unit can only display letters (upper case), numbers, album name). and a limited number of symbols. • The iPod does not turn on or does not work. • Check the connecting cable and its connection. • Update the firmware version. • Charge the battery. • The sound is distorted. Deactivate the equalizer either on the unit or the iPod. • "NO IPOD" appears on the display. • Check the connecting cable and its connection. • Charge the battery. • Playback stops. The headphones are disconnected during playback. Turn off the unit's power and turn it on again. • No sound can be heard when connecting an • Disconnect the headphones from the iPod nano. iPod nano. • Update the firmware version of the iPod nano. • "NO FILES" appears on the display. No tracks are stored. Import tracks to the iPod. • The iPod's controls do not work after disconnecting from this unit. Reset the iPod. • "CANNOT PLAY" appears on the display. Communication error occurs. Disconnect and connect the cable to the iPod again. iPod playback 21