JVC KD-SR80BT Instruction Manual - Page 14
Bluetooth mobile phone, Do this, Improve the sound quality during a call, Bluetooth compatibility - bluetooth connection
View all JVC KD-SR80BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
BLUETOOTH® "PAIRING COMPLETED" appears when pairing is completed. • " " will light up when a Bluetooth mobile phone is connected. • " " will light up when a Bluetooth audio player is connected. Bluetooth compatibility check mode You can check the connectivity of the supported profile between the Bluetooth device and the unit. • Make sure there is no Bluetooth device connected. 1 Press and hold . "BLUETOOTH" "CHECK MODE" appears. "SEARCH NOW USING PHONE" "PIN IS 0000" scrolls on the display. 2 Search and select "JVC UNIT" on the Bluetooth device within 3 minutes. 3 Perform (A), (B) or (C) depending on what appears on the display. (A) "PAIRING" "XXXXXX" (6-digit passkey): Ensure that the same passkey appears on the unit and Bluetooth device, then operate the Bluetooth device to confirm the passkey. (B) "PAIRING" "PIN IS 0000": Enter "0000" on the Bluetooth device. (C) "PAIRING": Operate the Bluetooth device to confirm pairing. After pairing is successful, "PAIRING OK" "[Device Name]" appears and Bluetooth compatibility check starts. If "CONNECT NOW USING PHONE" appears, operate the Bluetooth device to allow phonebook access to continue. The connectivity result flashes on the display. "PAIRING OK" and/or "H.FREE OK"*1 and/or "A.STREAM OK"*2 and/or "PBAP OK"*3 : Compatible *1 Compatible with Hands-Free Profile (HFP) *2 Compatible with Advanced Audio Distribution Profile (A2DP) *3 Compatible with Phonebook Access profile (PBAP) After 30 seconds, "PAIRING DELETED" appears to indicate that pairing has been deleted, and the unit exits check mode. • To cancel, press and hold B/SOURCE to turn off the power, then turn on the power again. Bluetooth mobile phone To Receive a call Reject an incoming call End a call Activate or deactivate hands-free mode Adjust the phone volume Switch between two connected phones Do this Press or the volume knob. On RM-RK52: Press J/K/H/I. • When [AUTO ANSWER] is set to the selected time, the unit answers incoming call automatically. ( 13) Press and hold or the volume knob. On RM-RK52: Press and hold J/K/H/I. Press and hold or the volume knob. On RM-RK52: Press and hold J/K/H/I. Press the volume knob during a call. • Operations may vary according to the connected Bluetooth mobile phone. Turn the volume knob during a call. Phone volume: [00] to [50] (Default: [15]) • This adjustment will not affect the volume of the other sources. Press repeatedly. • Not applicable during a call. Improve the sound quality during a call While talking on the phone.... 1 Press and hold MENU. 2 Turn the volume knob to make a selection ( the knob. 3 Press MENU to exit. 13), then press To return to the previous setting item or hierarchy, press G PTY. 12