JVC KD-X320BTS Instruction Manual - Page 17
BLUETOOTH - Mobile phone, Receive a call, Improve the voice quality - microphone
View all JVC KD-X320BTS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
BLUETOOTH® BLUETOOTH - Mobile phone Receive a call When there is an incoming call: - All the buttons flash. - The unit answers the call automatically if [AUTO ANSWER] is set to a selected time. ( 16) During a call: - If you turn off the unit or detach the faceplate, the Bluetooth connection is disconnected. To Answer a call Reject a call End a call Adjust the phone volume [00] to [50] (Default: [15]*) Switch between handsfree and private talk modes On the faceplate Press or the volume knob. Press and hold knob. or the volume Press and hold knob. or the volume Turn the volume knob during a call. • This adjustment will not affect the volume of the other sources. Press the volume knob during a call. • Operations may vary according to the connected Bluetooth mobile phone. On the remote control Press . Press and hold Press and hold - - * Not applicable for iPhone. During a call, the unit synchronizes the phone volume on the iPhone to the unit. Improve the voice quality While talking on the phone.... 1 Press and hold . 2 Turn the volume knob to make a selection (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected or activated. 4 Press to exit. To return to the previous setting item, press . Default: XX MIC LEVEL -10 - +10 (-4): The sensitivity of the microphone increases as the number increased. NOISE RDCT -5 - +5 (0): Adjust the noise reduction level until the least noise is being heard during a phone conversation. . ECHO CANCEL -5 - +5 (0): Adjust the echo cancellation delay time until the least . echo is being heard during a phone conversation. ENGLISH 15