JVC KW AVX810 Instructions - Page 63
Equalizer, Sound - reset
UPC - 046838031939
View all JVC KW AVX810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
ENGLISH Equalizer The procedure for setting an item is shown on page 57. Flat/Hard Rock/R&B/Pop/Jazz/Dance/Country/Reggae/Classic/User1/User2/User3 ☞ [55] Sound Menu items Selectable settings, [reference page] Fader/Balance Adjust fader-speaker output balance between the front and rear speakers. Fader/Balance • Upmost-front only (F6) Reset • Downmost-rear only (R6) Fader 0 Balance 0 When using a two-speaker system, set the fader to the center (0). Adjust balance-speaker output balance between the left and right speakers. Back Exit • Leftmost-left only (L6) • Rightmost-right only (R6) Initial 0 Volume Adjust *5 Adjust and store auto-adjustment volume level for each source, comparing to the FM volume level. The volume level will automatically increase or decrease when you change the source. -12 to +12; Initial 00 Subwoofer Level Adjust the subwoofer output level. Level: -06 to +08; Initial 00 High Pass Filter Through: Select when the subwoofer is not connected. On: Select when the subwoofer is connected. Crossover Adjust the crossover frequency between the front/rear speakers and the subwoofer. 80Hz, 120Hz, 150Hz Amplifier Gain You can change the maximum volume level of this unit. Off: Deactivates the built-in amplifier. Low: VOL 00 to 30 (Select this if the maximum power of the speakers is less than 50 W.) High: VOL 00 to 50 *5 For digital sources: you can make the adjustments separately depending on the audio format-Dolby Digital/DTS and the others. 63 SETTINGS