JVC KW-V220BT Instruction Manual - Page 72

REFERENCES ❏ Discs Recordable/Rewritable discs cannot be played back. • Insert a finalized disc. • Finalize the discs with the component which you used for recording. Tracks on the Recordable/Rewritable discs cannot be skipped. • Insert a finalized disc. • Finalize the discs with the component which you used for recording. Playback does not start. • The format of files is not supported by the unit. No picture appears on the external monitor. • Connect the video cord correctly. • Select the correct input on the external monitor. DivX*/MPEG1/MPEG2/MP3/WMA/WAV/AAC discs cannot be played back. • Record the tracks using a compatible application on the appropriate discs. (Page 67) • Add appropriate extension codes to the file names. Tracks on the Recordable/Rewritable discs are not played back as you have intended them to play. • Playback order may differ from the one played back using other players. * Only for KW-V420BT Region 4/KW-V320BT Region 4/KW-V220BT Region 4. ❏ USB "Reading" does not disappear from the screen. • Turn the power off and on again. While playing a track, sound is sometimes interrupted. • The tracks are not properly copied into the USB device. Copy the tracks again, and try again. Tracks are not played back as you have intended them to play. • Playback order may differ from the one played back using other players. ❏ Android Sound cannot be heard during playback. • Reconnect the Android device. • When is set to [AUDIO MODE], launch any media player application on the Android device and start playback. Sound output only from the Android device. • When is set to [AUDIO MODE], relaunch the current media player application or use another media player application. • Restart the Android device. • If this does not solve the problem, the connected Android device is unable to route the audio signal to unit. Cannot playback when is set to [AUTO MODE]. • Make sure JVC Music Play APP is installed on the Android device. • Reconnect the Android device and select the appropriate control mode. • If this does not solve the problem, the connected Android device does not support the Auto Mode. "NO DEVICE" or "READING" keeps flashing. • Switch off the developer options on the Android device. • Reconnect the Android device. • If this does not solve the problem, the connected Android device does not support the Auto Mode. ❏ iPod/iPhone No sound comes out of the speakers. • Disconnect the iPod/iPhone, then connect it again. • Select another source, then reselect "iPod". The iPod/iPhone does not turn on or does not work. • Check the connecting cable and its connection. • Update the firmware version. • Charge the battery. • Reset the iPod/iPhone. Sound is distorted. • Deactivate the equalizer either on this unit or the iPod/iPhone. A lot of noise is generated. • Turn off (uncheck) "VoiceOver" on the iPod/ iPhone. For details, visit . No operations are available when playing back a track containing artwork. • Operate the unit after the artwork has loaded. Videos cannot be played. • Connect with USB Audio and Video cable KS-U59 (optional accessory) to iPod/iPhone 30-pin connector model. Other cables cannot be used. • Select [USB+AV-IN] for . (Page 21) 72