JVC KW-V220BT Instruction Manual - Page 73
Specifications
View all JVC KW-V220BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
REFERENCES No sound of videos comes out. • Connect with USB Audio and Video cable KS-U59 (optional accessory) to iPod/iPhone 30-pin connector model. Other cables cannot be used. • Select [USB+AV-IN] for . (Page 21) ❏ Tuner SSM automatic presetting does not work. • Store stations manually. (Page 27) Static noise while listening to the radio. • Connect the antenna firmly. ❏ AV-IN "AV-IN" cannot be selected on the Home screen. • Select [USB 1 Wire] for . (Page 21) No picture appears on the screen. • Turn on the video component if it is not on. • Connect the video component correctly. ❏ Pandora* The application does not work. • The application on your iPod touch/iPhone/ Android is not the latest version. Update the application. * Only for KW-V420BT Region 1/KW-V320BT Region 1/KW-V220BT Region 1/KW-V120BT). ❏ Bluetooth Phone sound quality is poor. • Reduce the distance between the unit and the Bluetooth mobile phone. • Move the car to a place where you can get a better signal reception. The sound is interrupted or skipped while using a Bluetooth audio player. • Reduce the distance between the unit and the Bluetooth audio player. • Disconnect the device connected for Bluetooth phone. • Turn off, then turn on the unit. (When the sound is not yet restored) connect the player again. The connected audio player cannot be controlled. • Check whether the connected audio player supports AVRCP (Audio Video Remote Control Profile). The Bluetooth device does not detect the unit. • Search from the Bluetooth device again. The unit does not pair with the Bluetooth device. • For devices compatible with Bluetooth 2.1: Register the device using a PIN code. (Page 39) • For devices compatible with Bluetooth 2.0: Enter the same PIN code for both the unit and target device. If the PIN code of the device is not indicated in its instructions, try "0000" or "1234." • Turn off, then turn on the Bluetooth device. Echo or noise occurs. • Adjust the microphone unit position. • Adjust the echo volume or noise reduction volume. (Page 41) The unit does not respond when you try to copy the phone book to the unit. • You may have tried to copy the same entries (as stored) to the unit. Specifications ❏ Monitor section Picture Size (W x H) KW-V420BT: 6.95 inches(diagonal) wide 156.6 mm × 81.6 mm (6-3/16" x 3-3/16") KW-V320BT/KW-V220BT/KW-V120BT: 6.2 inches(diagonal) wide 137.5 mm× 77.2 mm (5-7/16" × 3-1/16") Display System Transparent TN LCD panel Drive System TFT active matrix system Number of Pixels 1152 000 (800H × 480V × RGB) Effective Pixels 99.99% Pixel Arrangement RGB striped arrangement Back Lighting LED ENGLISH 73