JVC KY-F560U KA-F5602U, KA-F5603U Studio kit for KY-F560U camera (47 page inst - Page 11
Part Names and Functions continued, INCOM MIC] Intercom Mic [CARBON
![]() |
UPC - 046838326004
View all JVC KY-F560U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
English Part Names and Functions (continued) 5 [INCOM MIC] Intercom Mic [CARBON/ DYNAMIC] Switch Use for selecting the type of intercom headset microphone to be used. [CARBON] : Choose this setting if car- bon type microphone is to be used. [DYNAMIC] : Choose this setting if dynamic type microphone is to be used. If JVC Headset KA-310U is to be used, choose the [CARBON] setting. 6 [CALL] Call Button Press this button to send call signal to the remote control unit operator if intercom headset is not in-use. When this button is pressed and held down, call signal is being sent to the remote control unit and its [TALLY] button indicator will blink. Once the [CALL] button is released, call signal will not be sent and the [TALLY] button indicator of the remote control unit will go off. 7 [CALL] Indicator If the remote control unit is connected, it will light up during the duration when 6 [CALL] button is being pressed and held down. The indicator will go off once the [CALL] button is released. 8 Camera Mounting Frame Remove this frame for the mounting of KYF560 camera. 9 Relay Board This board is meant for connecting to KYF560 camera. This is to be inserted into the slot at the rear of KY-F560. 0 [SDI OUT] SDI Output Terminal...Only for KA-F5603U Camera video is output in the form of SDI signal. Caution To avoid causing malfunction, please do not touch this terminal except when connecting cable to it. ! [VF] Viewfinder Terminal (6 Pin) Use for connecting cable from the Viewfinder. @ Viewfinder Holder Use for mounting the VF-P400 4-inch Viewfinder. # Lens Cable Clamp This clamp is meant for securing the lens cable. 11
![](/manual_guide/products/jvc-kyf560u-kaf5602u-kaf5603u-studio-kit-kyf560u-camera-47-instruction-manual-2501512/11.png)