JVC TH-L1 Instructions - Page 15

Connections Do not connect the power cord until all other connections have been made. Connecting the video components for the source of VIDEO 2 7 To connect the video components for the source of VIDEO 2 • You can get better picture quality in the order - HDMI > Component video > S-video > Composite video. Center unit Digital coaxial audio cord (not supplied) HDMI cord (not supplied) To HDMI output To digital coaxial audio output RCA pin plug cord To analog (not supplied) audio output DVD recorder, DVD player, satellite tuner, VCR or game console To composite video output To S-video output Composite video cord (supplied) or Align the 5 marks. S-video cord (not supplied) To component video output Component video cord (not supplied) NOTE • Unify the way of TV connection and that of video component's (for example, connect a video component through S-VIDEO jack when TV is connected through S-VIDEO jack). Otherwise, the signal from the component is not sent to the TV. • The audio signal through the HDMI VIDEO 2 IN terminal is not reproduced on this system. The signal is reproduced on the TV connected with HDMI MONITOR OUT terminal. • Use an HDMI cable shorter than 5 m (15 ft). • When you are playing HDCP (High-Bandwidth Digital Content Protection) content, the sound and picture may not be transmitted to the speakers and TV for a few seconds at the beginning due to the confirmation process. • If the component video output jacks of your video components of the BNC type, use a plug adapter (not supplied) to convert the pin plugs to BNC plugs. • When shipped from the factory, the source of "VIDEO 2" have been set for use with the AUDIO VIDEO 2 IN terminal for the audio connection. If you connect the components with digital coaxial audio cord, change the audio input (VIDEO 2) setting to "Digital." (See page 31.) • If you connect a sound-enhancing device such as a graphic equalizer between the source components and this system, the sound output through this system may be distorted. 11