JVC TMH-1750CGU Instruction Manual - Page 15

DISPLAY AND SELECTIONS IN THE MODE (SETTING) ENGLISH You can set the following set-up menu items. screen • PICTURE SUB ADJ. • H. POSITION • V. POSITION • WHITE BALANCE • CONTROL LOCK • STATUS DISPLAY • REMOTE SYSTEM • INPUT REMOTE 1 4 PICTURE SUB ADJ. H. POSITION : 00 V. POSITION : 00 Notes: WHITE BALANCE CONTROL LOCK : OFF ● Parameters for PICTURE SUB ADJ., H. POSITION and V. POSITION can be set separately depending on the signal (Input A (VIDEO), Input B (VIDEO), Input C or Input D) selected with the input select buttons on the front panel. 2 STATUS DISPLAY : ON REMOTE SYSTEM : MAKE INPUT REMOTE : A-D 3 Select the required video input with the input select buttons on the front panel in EXIT 4 advance. ● WHITE BALANCE can be set independently at 6500 or 9300 for the color temperature value. Set COLOR TEMP. to 6500 or 9300 on the screen beforehand. CHROMA CONTRAST VOLUME/SELECT MENU ● INPUT REMOTE is shown when REMOTE SYSTEM is set to MAKE. PHASE BRIGHT 1. While pressing the MENU button, press the CHROMA/PHASE button. CHROMA MENU PHASE The screen is displayed. * The on-screen display goes off automatically after about five minutes with operation performed. 2. Press the CHROMA/PHASE or CONTRAST/BRIGHT button to select the desired menu item. 1 Selection mark (4): Indicates the menu item you select. 2 Menu item: Menu items you can select. 3 Setting display: Indicates the current settings (value). 4 Function display: The functions of the front panel buttons (5 buttons on the left) correspond to the function displayed. CHROMA CONTRAST PHASE BRIGHT PICTURE SUB ADJ. H. POSITION V. POSITION WHITE BALANCE CONTROL LOCK STATUS DISPLAY REMOTE SYSTEM INPUT REMOTE A selection mark (4) is put next to the selected item. Front panel button CHROMA/ PHASE CONTRAST/ BRIGHT Function displayed Contents ᮢ Forward selection mark (4) ᮡ Reverse selection mark (4) 3. Press the VOLUME/SELECT buttons to set. VOLUME/SELECT Front panel button VOLUME/ SELECT (+) VOLUME/ SELECT (-) Function displayed + 4 CUTO - 1 DRV Contents Increase (to max. value) Forward the setting value Selects CUT OFF setting screen Decrease (to min. value) Reverse the setting value Selects DRIVE setting screen Notes: Function displayed Contents ᮢ Forward the menu item. ᮡ Reverse the menu item. - Lower the adjustment value. (to the minimum) + Raise the adjustment value. (to the maximum) 4 Forward the setting value. 1 Reverse the setting value. Exit the EXIT screen. DRV Selects DRIVE adjustment. Selects CUT OFF CUTO adjustment. Adjusts red and blue RB signal level. Adjusts red, green and RGB blue signal level. DISP Turns the ON-SCREEN display on or off. (This function is effective only in the DRIVE or CUT OFF adjustment mode.) ● For WHITE BALANCE items, select the CUT OFF or DRIVE setting screen, then select the function display for adjustment. ● Press the EXIT (MENU) button to return to the screen. 13