JVC TMH-1750CGU Instruction Manual - Page 17

ENGLISH HOW TO INITIALIZE THE SETTING SCREEN DISPLAY AND SELECTIONS IN THE RESET MODE You can set and screen items, picture adjustment items and the volume level to their factory-set (initial) values. 1. Press the Power ( ) switch to turn the power OFF (activate the standby mode). POWER RESET screen RESET Are you sure ? "Yes" then "No" then 2. While pressing both MENU button and CHROMA/ PHASE button, press the Power ( ) switch to turn the power ON. CHROMA MENU The RESET screen is displayed. POWER PHASE Note: ● The RESET screen will not be displayed if the MENU or CHROMA/PHASE buttons are pressed for a very short time. Keep pressing them until the display screen appears. 3. Setting ⅷ Initialization is required. VOLUME/SELECT Press the VOLUME/SELECT [+] button. * Initialization is completed, and the RESET screen disappears. ⅷ Initialization is not required. MENU Press the MENU button. * Initialization is aborted, and the RESET screen disappears. Initial settings screen Sorts screen Functions (Items) Initialization (setting) APERTURE ADJ. BAR POSI COLOR TEMP COLOR SYSTEM COMPO. LEVEL RUSH DELAY 00 LOWER 6500 AUTO 00 STD. PICTURE SUB ADJ. CONTRAST 00 BRIGHT 00 CHROMA 00 PHASE 00 H. POSITION 00 V. POSITION 00 WHITE BALANCE R. CUT OFF 00 G. CUT OFF 00 B. CUT OFF 00 R. DRIVE 00 B. DRIVE 00 CONTROL LOCK OFF STATUS DISPLAY ON REMOTE SYSTEM MAKE INPUT REMOTE A - D CHROMA 00 PHASE 00 CONTRAST 00 BRIGHT 00 VOLUME 20 Volume Picture adjustment 15