JVC TMH-1750CGU Instruction Manual - Page 24
YAPPENDIX: CONNECTION EXAMPLES FOR THE CSDI INPUT CARD, Y/C Mini DIN 4 pin terminal, specification
![]() |
UPC - 046838205880
View all JVC TMH-1750CGU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Ⅵ Y/C (Mini DIN 4 pin) terminal specification 2 IN 1 OUT 2 1 4 3 Y/C 4 3 Pin No. 1 2 3 4 Signal GND (Y) GND (C) Y C APPENDIX: CONNECTION EXAMPLES FOR THE SDI INPUT CARD ● To use the SWITCHED OUT terminal, the main power must be ON. (Unlike a bridged output, this connector outputs relocked digital signals.) ● Signal output from the SWITCHED OUT terminal can be changed by selecting INPUT C (SDI 1) or INPUT D (SDI 2). You can use the front panel buttons or do it via external control. ● When INPUT-A or INPUT-B is selected, this terminal outputs the signals last selected. In the standby mode, signals from the SDI 1 connector are output. 22 21
![](/manual_guide/products/jvc-tmh1750cgu-instruction-manual-a06a707/24.png)
21
●
To use the SWITCHED OUT terminal, the main power must be ON. (Unlike a bridged output, this connector outputs relocked
digital signals.)
●
Signal output from the SWITCHED OUT terminal can be changed by selecting INPUT C (SDI 1) or INPUT D (SDI 2). You can
use the front panel buttons or do it via external control.
●
When INPUT-A or INPUT-B is selected, this terminal outputs the signals last selected. In the standby mode, signals from the
SDI 1 connector are output.
APPENDIX: CONNECTION EXAMPLES FOR THE
SDI INPUT CARD
Pin No.
Signal
1
GND (Y)
2
GND (C)
3
Y
4
C
±
Y/C (Mini DIN 4 pin) terminal
specification
IN
Y/C
OUT
2
1
2
1
4
3
4
3
22