JVC VN-C10U VN-C10U User Manual (32 pages) - Page 9

Controls, Connectors and Indicators (continued) (Side and rear views) 9 0! # $% DC12V AC24V CLASS 2 ONLY For USA ISOLATED POWER ONLY For EUROPE INPUT OUTPUT RESET IRIS @ 1 2 G 2 1 OUT COM POWER ALARM PUSH 10BASE-T/100BASE-TX For USA DO NOT CONNECT TO THE TELEPHONE NETWORK ^ 9 Ventilation opening # [DC 12 V/AC 24 V] Power terminal For the internal cooling fan. Install the camera in a way that does not cover the opening. For connecting to a DC 12 V or AC 24 V, 50 Hz/ 60 Hz, power source. (☞ Page 13) 0 [RESET] button Press this button to reset VN-C10. If this button is held down for 2 seconds or longer, the values set with [V.Networks Setup Tool] return to those set at the factory, and VN-C10 restarts. ! [IRIS] terminal For connecting with a DC IRIS lens. (A video iris lens cannot be connected.) @ [POWER] indicator This indicator starts blinking when the power is turned on. When the camera is ready for network connection, this becomes steady on. If the indicator blinks while the camera is in use, check the camera and/or the network equipment. $ [ALARM INPUT] terminals For connecting with an external alarm equipment. % [ALARM OUTPUT] terminals For connecting with an external alarm equipment. ^ [10 BASE-T/100 BASE-TX] For network connection with a LAN cable. (☞ Page 14) 9