JVC XA-GP1BK Instruction Manual - Page 16

How to Use the Portable ROM Player

Page 16 highlights

How to Use the Portable ROM Player (XA-GP1BK) To prevent any accidents such as dropping the Portable ROM PLayer, it is recommended that the included hand or neck strap be attached before use. Attaching the hand or neck strap Hand strap or neck strap (both are included) Inserting and ejecting the CF card • Inserting the card Cutout groove • To prevent any accidents such as dropping the Portable ROM Player, please attach the hand or neck strap. • Adjusting the length of the neck strap 1 While pushing down... 2 Pull in this direction to shorten the strap. CF card (sold separately) • With the surface that has a cutout groove facing up, insert the card into the slot. (The card cannot be inserted upside down.) • Ejecting the card 1 Turn the POWER to OFF. 2 Push a screwdriver (2 mm diameter) into the CF card ejection hole. • Slotted screwdriver used for watches Push a screwdriver (2 mm diameter) or similar tool into the hole and the CF card will come out. 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27

16
How to Use the Portable ROM Player
(XA-GP1BK)
To prevent any accidents such as dropping the Portable ROM PLayer, it is recommended that the included hand
or neck strap be attached before use.
Hand strap or neck
strap (both are
included)
Cutout groove
Attaching the hand or neck strap
Inserting and ejecting the CF card
To prevent any
accidents such as
dropping the Portable
ROM Player, please
attach the hand or neck
strap.
Adjusting the length of the neck strap
1
While pushing down...
2
Pull in this
direction to
shorten the strap.
Inserting the card
CF card (sold separately)
With the surface that has a cutout groove facing up,
insert the card into the slot. (The card cannot be
inserted upside down.)
Ejecting the card
1
Turn the POWER to OFF.
2
Push a screwdriver (2 mm diameter)
into the CF card ejection hole.
Slotted screwdriver used for watches
Push a screwdriver (2 mm diameter) or similar tool
into the hole and the CF card will come out.