JVC XA-GP1BK Instruction Manual - Page 24

Troubleshooting -- Problem? Malfunction? If problems arise, first try these suggestions before having the unit serviced. Checking the Portable ROM Player Problem Possible Cause • POWER is not turned ON. Solution • Turn POWER switch to ON. Reference page page 17 • When POWER is turned ON, • There is a problem with the the display window stays fixed internal program of the main on the display . unit. ¶ Contact a JVC service representative. • The display window stays fixed • Take out the CF card and insert on a number display such as again. If this does not resolve the ¶ Does not operate. . problem, contact a JVC service representative. • The display window stays fixed • The CF card has malfunctioned. on the error display . Replace with a CF card that ¶ functions properly. • The internal battery pack has not been recharged. Even after recharging, within a short time the unit cannot be used. • The battery pack is about 2 years old and should be replaced. • POWER is not turned ON. • Recharge the Portable ROM Player with the recommended chager. page 7 • Purchase a new battery pack (BN-R368) at your local dealer. page 23 • Plug the power adaptor into a power outlet. page 8 • Master/Slave switch is not switched to "M" master. • Switch to "M" master. page 8 M S • Auto/Point switch is not set properly. Does not operate. • Address number is not properly set. • When using the Pointing method: set the switch to "P" point. A P • When using the Auto method: A P set the switch to "A" Auto. • Set the correct 3 digit address number using the Address Rotary switch. page 8 page 8 • The exhibit card is covering the optical transmission lens. • Place the card so that the optical transmission lens is visible. page 10 Checking the Infrared Address Transmitter 24