JVC XA-GP1BK Instruction Manual - Page 7

How to Recharge the Portable ROM Player The portable ROM Player operates on a battery pack which contains rechargeable Lithium ion batteries. Batteries should be recharged for more than three hours before use. How to Recharge the Portable ROM Player 1 Connect the power cord. 2 Plug the power cord plug into a standard household power outlet. AC110-240V 50/60Hz (Power outlet that is always supplied with a continuous current.) Power cord (included with the Charger) Only use the indicated power cord. Charger (XA-GC20BK) • There is no power switch on the Charger. • Place on a level and flat surface. 1 Connect the power cord to the AC IN jack. When power cord is plugged in, the heat ventilation fan begins to operate. 2 Insert the Portable ROM Player. The display window should be facing towards you. Portable ROM Player (XA-GP1BK) • A maximum of 20 units can be recharged at one time. The Portable ROM Player should be recharged with the POWER turned OFF. The amount of time necessary to recharge the batteries becomes slightly longer when the POWER is left ON. Recharge indicator • About 3 hours is required to fully recharge the batteries. Even when the Portable ROM Player is left in the recharger, it is not possible for the batteries to become over charged. • Recharge indicator The battery level is indicated by the color of the light. Red Green : Less than 60% of recharging has taken place. : The batteries are more than 60% recharged. Even when the batteries become completely recharged, the indicator light stays on. Note • Take precautions to install the Charger more than 10 cm from a wall or other objects. This assures that the unit can be adequately cooled during operation. 7