Jenn-Air JB36NXFXRW Use and Care - Page 4
Before Use, Refrigerator Use
View all Jenn-Air JB36NXFXRW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
BEFORE USE CAUTION Pinch Hazard Installation of door panels with less than a ³⁄₈" (0.95 cm) gap between the door panel and the adjacent cabinet increases the risk of potential pinching. Remove the Packaging ■ Remove tape and glue residue from surfaces before turning on the refrigerator. Rub a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water and dry. ■ Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your refrigerator. For more information, see "Refrigerator Safety." ■ Dispose of/recycle all packaging materials. Clean Before Using After you remove all of the packaging materials, clean the inside of your refrigerator before using it. See the cleaning instructions in "Refrigerator Care." Important information to know about glass shelves and covers: Do not clean glass shelves or covers with warm water when they are cold. Shelves and covers may break if exposed to sudden temperature changes or impact, such as bumping. Tempered glass is designed to shatter into many small, pebble-size pieces. This is normal. Glass shelves and covers are heavy. Use both hands when removing them to avoid dropping. REFRIGERATOR USE WARNING Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. WARNING Explosion Hazard Keep flammable materials and vapors, such as gasoline, away from refrigerator. Failure to do so can result in death, explosion, or fire. Power On/Off Switch If you need to turn the power to your refrigerator On or Off, you must remove the top grille panel to access the power switch. Turn the power to the refrigerator Off when cleaning your refrigerator or changing light bulbs. B A B A. Top grille B. Cabinet sides Standard Installation - Flush Grille To remove the top grille panel: 1. Open the door(s). 2. Lift the top grille panel straight up, then pull straight out. Place the panel on a soft surface. To replace the top grille panel: 1. Hook the panel brackets onto the mounting bolts extending from the top of the refrigerator. 2. Pull the grille panel down slightly to lock into place. 4