Jenn-Air JB36NXFXRW Use and Care - Page 7

Over Temperature IMPORTANT: If the Over Temperature Alarm activates, your food may spoil. See "Power Interruptions." Minimize door openings until temperatures return to normal. The Over Temperature feature is designed to let you know when either the refrigerator temperature rises above 48°F (9°C) or the freezer temperature rises above 15°F (-9°C) for longer than 1¹⁄₂ hours. The audio alarm will shut off automatically when the temperature returns to normal, but the indicator light will continue to flash until the Alarm is pressed to let you know that an over temperature condition has occurred. If the over temperature condition is still present when an Over Temperature Reset is performed, the indicator light will continue to reactivate every 1¹⁄₂ hours until refrigerator and freezer temperatures are below 48°F (9°C) and 15°F (-9°C), respectively. NOTE: To deactivate the audio alarm and indicator light, see "Master Alarm Reset." Call Service If the Call Service indicator light is flashing, call for service. See the "Assistance or Service" section for information on calling for service. NOTE: To deactivate the audio alarm and indicator light, see "Master Alarm Reset." Max Cold The Max Cold feature assists with periods of heavy ice usage, full grocery loads, or temporarily warm room temperatures. ■ Press MAX COLD to turn on the Max Cold feature. The Max Cold indicator light will remain on for 24 hours unless manually turned off. NOTE: The temperature display will remain at 34°F (1°C) and -5°F (-21°C) for the refrigerator and freezer compartments, respectively, while the Max Cold feature is enabled. After 24 hours, the refrigerator returns to the previous temperature set points. Sabbath Mode (on some models) The Sabbath Mode feature is designed for the traveler or for those whose religious observances require turning off the lights and ice maker. By selecting this feature, the temperature set points and Deli drawer settings remain unchanged, the ice maker will be disabled and the interior lights will turn off. For most efficient refrigerator operation, turn off Sabbath Mode when it is no longer required. ■ Press SABBATH MODE to turn on this feature. ■ Press SABBATH MODE again to turn off this feature. NOTES: ■ If the refrigerator is operating in Sabbath mode and you press SABBATH MODE to turn off the feature, close the doors and drawer (on some models) to reset the interior lighting. ■ If the Max Cold feature has been selected prior to turning on the Sabbath Mode feature, then the set points will remain at 34°F (1°C) and -5°F (-21°C) for the refrigerator and freezer compartments, respectively, until the Max Cold feature times out. The refrigerator will then return to the previous temperature set points chosen prior to the selection of the Max Cold feature, but the lights and ice maker will remain off until Sabbath Mode is pressed again. Energy Saver Feature (42" Bottom Mount Only) The Energy Saver feature controls the heaters located inside the hinged seal between the refrigerator doors. The heaters help keep external moisture from forming on the hinged seal. ■ Press ENERGY SAVER to turn on this feature for low humidity conditions. The ring around the control will be lit when Energy Saver is on. If moisture begins to collect on the hinged seal between the doors, press ENERGY SAVER again to turn off this feature. Water Filter Status The Reset Filter control allows you to restart the water filter status tracking feature each time you replace the water filter. See "Water Filtration System." ■ Press and hold RESET FILTER for 3 seconds, until the Order or Replace light turns off. REFRIGERATOR FEATURES Refrigerator Shelves Important information to know about glass shelves and covers: Do not clean glass shelves or covers with warm water when they are cold. Shelves and covers may break if exposed to sudden temperature changes or impact, such as bumping. Tempered glass is designed to shatter into many small, pebble-size pieces. This is normal. Glass shelves and covers are heavy. Use both hands when removing them to avoid dropping. The shelves in your refrigerator are adjustable to meet your individual storage needs. Storing similar food items together in your refrigerator and adjusting the shelves to fit different heights of items will make finding the exact item you want easier. It will also reduce the amount of time the refrigerator door is open, and save energy. Remove and Replace a Shelf/Frame 1. Remove the shelf by tilting it up at the front and lifting it out of the shelf supports. Pull shelf straight out. 2. Reposition the shelf supports in the desired location. Check that they are level and firmly inserted in the support rails. 3. Place the back of the shelf in the shelf supports. 4. Lower the front of the shelf and make sure that it is in position. 7