Jenn-Air JGRP436HL Installation Instructions - Page 31

gas orifice spud counterclockwise and lifting out. Set gas

Get Jenn-Air JGRP436HL PDF manuals and user guides View all Jenn-Air JGRP436HL manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

4. Remove the oven bake burner screws and oven bake burner. Rotate burner 90° to the left, and gently lay on its side. D C 6. Pull electrode out of bracket. A B A B A. Oven bake burner screws B. Oven bake burner C. Oven bake burner electrode bracket D. Oven bake burner electrode 5. Lift up clip on the oven bake burner electrode bracket with a finger or flat-blade screwdriver, and pull away the electrode. B A A. Grasp electrode here. B. Bracket 7. Apply masking tape to the end of a 1/4" (6.4 mm) nut driver to help hold the gas orifice spud in the nut driver while changing it. Insert nut driver into the gas opening, and press down onto the gas orifice spud, then remove by turning the gas orifice spud counterclockwise and lifting out. Set gas orifice spud aside. A A. Oven bake burner electrode bracket B. Electrode bracket clip A. Gas orifice spud 8. Gas orifice studs are stamped with a letter and a number. Install the Number 189 oven bake burner orifice spud. 9. Place Propane gas orifice in plastic parts bag for future use, and keep with package containing literature. 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
31
4.
Remove the oven bake burner screws and oven bake burner.
Rotate burner 90° to the left, and gently lay on its side.
5.
Lift up clip on the oven bake burner electrode bracket with a
finger or flat-blade screwdriver, and pull away the electrode.
6.
Pull electrode out of bracket.
7.
Apply masking tape to the end of a 1/4" (6.4 mm) nut driver
to help hold the gas orifice spud in the nut driver while
changing it. Insert nut driver into the gas opening, and press
down onto the gas orifice spud, then remove by turning the
gas orifice spud counterclockwise and lifting out. Set gas
orifice spud aside.
8.
Gas orifice studs are stamped with a letter and a number.
Install the Number 189 oven bake burner orifice spud.
9.
Place Propane gas orifice in plastic parts bag for future use,
and keep with package containing literature.
A
B
D
C
A. Oven bake burner screws
B. Oven bake burner
C. Oven bake burner electrode bracket
D. Oven bake burner electrode
A
B
A. Oven bake burner electrode bracket
B. Electrode bracket clip
A
B
A. Grasp electrode here.
B. Bracket
A
A. Gas orifice spud