Jenn-Air JGRP436HL Installation Instructions - Page 34
Gas orifice studs are stamped with a letter and a number.
View all Jenn-Air JGRP436HL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
6. Lift clip up on the oven bake burner electrode bracket with a finger or flat-blade screwdriver. B A 8. Apply masking tape to the end of a 1/4" (6.4 mm) nut driver to help hold the gas orifice spud in the nut driver while changing it. Insert nut driver into the gas opening, and press down onto the gas orifice spud, then remove by turning the gas orifice spud counterclockwise and lifting out. Set gas orifice spud aside. A A. Oven bake burner electrode bracket B. Electrode bracket clip 7. Pull electrode out of bracket. A B A. Gas orifice spud 9. Gas orifice studs are stamped with a letter and a number. Install the Number 154 oven bake burner orifice spud. 10. Place Propane gas orifice in plastic parts bag for future use, and keep with package containing literature. 11. Push down on the clip on the electrode bracket. B A A. Grasp electrode here. B. Bracket A. Oven bake burner electrode bracket B. Electrode bracket clip 34