Jenn-Air JUGFL242HL1 Owners Manual 1 - Page 7
Glass Door Overlay Panel - Preparation, Important
View all Jenn-Air JUGFL242HL1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
GLASS DOOR OVERLAY PANEL - PREPARATION Create the custom overlay panel using the dimensions shown in the illustration " Glass door overlay panel and hinge routing dimensions". Rout shaded areas to a 1/2" (12 mm) depth as shown. IMPORTANT: The following graphic shows a custom panel for a door with the hinges installed on the righthand side. If your refrigerator has the hinges installed on the left-hand side, rotate the custom frame 180° so the hinge markings will be on the left. HANDLE (OPTIONAL) Custom handles are typically attached to the custom overlay door panel only. Refer instructions received with JennAir RISETM and NOIRTM handle kits to install these handles on custom wood panels. Custom handle needs to be installed on the door panel with countersunk holes and installed before the custom overlay door panel has been installed on the refrigerator door. 1/8" (3 mm) 1/4" (7 mm) 415/16" (125 mm) 1/2" (12 mm) 2" (53 mm) 305/8" (77.75 cm) 171/16" (43.3 cm) 2113/16" (55.4 cm) 233/4" (60.3 cm) Glass door overlay panel and hinge routing dimensions 7