Jensen HD5212 Operation Manual - Page 13
Menu Operation, Equalizer, Loudness, Auxiliary Input, Front Panel Release - hd radio
UPC - 043258304117
View all Jensen HD5212 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
HD5212 Menu Operation Press and hold the rotary encoder (4) to access the system menu. Repeatedly press the rotary encoder button to access menu options in the following order: • BEEP ON/OFF: The beep tone feature allows the selection of an audible beep tone to be heard each time a button is pressed on the face of the radio. "BEEP ON" is the default display. Rotate the rotary encoder to select the "BEEP OFF" option. • P--VOL: Turn the rotary encoder to select the default volume the radio will assume when first turned on. • PCLK ON/OFF: When "ON", the clock and backlight will remain on when the unit is turned off. • PRI CLK/SRC: Select "CLK" to have the clock appear on the display during playback. Select "SRC" to have the current source appear during playback. Press the DISP button (7) to temporarily view the alternate display (clock or source) temporarily. • HOURS 12/24: This option allows selection of a 12 hour or 24 hour clock format. "HOURS 12" is the default setting. Turn the rotary encoder to change to the 24 hour clock format. • S--MODE NORMAL/HD SEEK (adjustable only in RADIO mode): Select "NORMAL" to allow the radio to search for both digital and analog stations. Select "HD SEEK" to only search and broadcast digital stations. Equalizer Press the EQ button (20) to choose one of the following pre-defined bass and treble curves: FLAT > CLASSICS > POP M > ROCK M > DSP OFF. Loudness Press and hold the BAND button (3) toggle loudness on/off. When listening to music at low volumes, this feature will boost the bass and treble ranges to compensate for the characteristics of human hearing. Auxiliary Input To access an auxiliary device: 1. Connect the portable audio player to the AUX IN jack on the front panel (12). 2. Press the SRC button (2) to select AUX mode. 3. Press SRC again to cancel AUX mode and go to the next mode. Setting the Clock If not already showing, press the DISP button (7) to display the clock. With the clock displayed, press and hold the DISP button and the time will flash on the display. Press the TUNE/CH >> button (10) to adjust the hours or the TUNE/CH