Jensen JGC9536ADB User Guide - Page 7

2

3

4

5

1. Left rear

surface simmer

burner (5,000

BTUs on Hi, 650 BTUs on Lo).

2.

Left front

surface

burner (9,200 BTUs).

3.

Center

surface

burner (I 7,000 BTUs).

4.

Right front

surface burner

(12,500

BTUs).

5.

Rightrear surface

simmer

burner (5,000


MODEL

JGC9430

SEALED

BURNERS

The

sealed

burners are

secured

to the

cooktop and are not designed to

be

re-

moved.

Since

the burners are sealed into

the cooktop,

boilovers or spills will

not

seep underneath the cooktop.

However, the burners should be cleaned

after each use. The head portion of the

burner has a removable cap that is easily

removed for cleaning.(Seepage8for clean-

ing directions.)

Burner caps must be correctly placed on

the

burner base

for proper operation of the

burner.

H_GH

PERE/(,}

R/%IAN (

E

.....

There is one high

speed

burner on

your

cooktop, located in the center (select mod-

els) or

right front

position. This burner

offers higher speed cooking that can be

usedto quickly bring water to a boil and for

SIJVU tER

BUINEIIS*

These burners are located in the left

and

right rear

positions (select models)

or the

left front position. The

simmer

burner

of-

fers

a

lower BTU flame for delicate sauces

or melting chocolate.

* BTU

ratings

wil!

vary

when using

LP

gas.

The grates must be properly positioned

before cooking. To ensure proper posi-

tioning, align

bumpers

on grate

bottom

with the Iocators in the cooktop.

Do notoperatetheburnerswithouta

pan

on the

grate,

The

grate's

porce-

lain

finish

may

chip

without

a pan to

absorb

the

heat

from

the

burner

flame,

Although the burner grates are durable,

they will gradually lose their shine and/or

discolor, due to the high temperatures of

the gas

flame.

12

34

1. Leffrear surface burner (10,500 BTUs).

2,

Leftfrontsurface simmer burner (5,000


3.

Right front

surface burner

(IS,000

BTUs).

4.

Right rear surfaceburner (9,200 BTUs).

•

A properly adiusted burner with clean ports will light within a few

seconds.

If using

natural gas,the flame will be blue with a deeper blue inner cone.

If the burner flame isyellow or is noisy,the air/gasmixture maybe incorrect. Contact

a service technician to adiust. (Adiustments are not covered by the warranty.)

With

LP gas, some yellow tips on the flames are acceptable. This is normal and

adiustment

is

not necessary.

With some types of gas,you may hear a "popping" sound when the surface burner

is turned off. This is a normal operating

sound

of the burner.

•

To improve cooking efficiency and to prevent possible damageto the cooktop or

pan,the flame must be adjusted

so

it does not extend beyond the edge of the pan.

6

Jensen JGC9536ADB User Guide - Page 7

Sijvu Ter, Buineiis - btus

Page 7 highlights