Jensen JGW8130DDB Use and Care Guide - Page 14

CARE CLEANING 5. Press the Autoset 0 pad to scroll through the self-cleaning settings. HVy (Heavy Soil, 4 hours) iJ v ^utoset / / MEd (Medium Soil, 3 hours) LITE (Light Soil, 2 hours) Choosing the soil level of the oven automatically programs the self-cleaning time. 6. After four seconds, CLEAN and DELAY will light and LOCK will flash in the display. When the oven door latches, LOCK will stop flashing and light continuously to show that the oven is set for a delayed clean operation. The delay time will display. During the Self=Clean Cycle When LOCK shows in the display, the door cannot be opened. To prevent damage to the door, do not force the door open when LOCK is displayed. Smoke and Smells You may see some smoke and smell an odor the first few times the oven is cleaned, This is normal and will lessen in time, Smoke may also occur if the oven is heavily soiled or if a broiler pan was left in the oven. Sounds As the oven heats, you may hear sounds of metal parts expanding and contracting. This is normal and will not damage the oven. After Self=Cleaning About one hour after the end of the self-clean cycle, LOCK will turn off. The door can then be opened. Some soil may leave a light gray, powdery ash. Remove it with a damp cloth. If soil remains after wiping, that means the clean cycle was not long enough. The soil will be removed during the next clean cycle. If oven racks were left in the oven and do not slide smoothly after a clean cycle, wipe racks and rack supports with a small amount of vegetable oil to make them easier to m ove. Fine lines may appear in the porcelain because it went through heating and cooling. This is normal and will not affect performance. A white discoloration may appear after cleaning if acidic or sugary foods were not wiped up before the self=clean cycle. This discoloration is normal and will not affect performance. Self=Clean Notes: • If the oven door is left open, "door" will flash in the display and a signal will beep until the door is closed and the Clean pad is pressed again, • If more than five seconds elapse between pressing the Clean pad and the Autoset 0 pad, the program will automatically return to the previous display, • A cooling fan will turn on during the self-clean cycle and will automatically turn off after the clean cycle when the oven has cooled, If it does not operate, contact an authorized servicer, • The oven door will be damaged if the oven door is forced to open when "LOCK" is still displayed, 13