Jensen JGW8130DDB Use and Care Guide - Page 7
Baking, Cook & Hold - not heating
UPC - 719881125190
View all Jensen JGW8130DDB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
OVENCo K=N Baking To set Bake: 1. Press the Bake pad. • BAKE and 000 will flash in the display. _..B.a.k.e../.......Ba.na..dk.ingNewDifOfevreennces Between Your Old It is normal to notice some baking time differences between a new oven and an old one. See "Adjusting the OvenTemperature" on page 10. 2. Select the oven temperature. Press the Autaset 0 pad for 350° F or the appropriate number pads. • Each additional press of the Autaset 0 pad will increase the temperature by 25°. ° The oven temperature can be set from 170° to 550°. 3. Press Bake pad again or wait four seconds. ° BAKE will stop flashing and light in the display. Cook & Hold When using the Cook & Hold option, the oven begins to heat immediately after the control has been set. Then, the oven cooks for a specified length of time. When that time has elapsed, the oven will keep the food warm for up to an hour then automatically turn off. To set Cook & Hold: 1. Press the Cook & Hold pad. Cook& Hold / • HOLD will flash to indicate that you are in Cook & Hold programming. ° 100° or the actual oven temperature if over 100° Fwill display. It will rise in 5° increments until the preset temperature is reached. 4. Allow the oven to preheat for 8-15 minutes. ° When the set oven temperature is reached, one long beep will sound. • The set temperature will display. ° To recall set temperature during preheat, press Bake pad. 5. Place food in the oven. 6. Check cooking progress at the minimum cooking time. Cook longer if needed. • 00:00 will flash in the display. 2. Select the amount of time you want to cook by using the number pads. ° HOLD continues to flash. • The time will light in the display. ° Time can be set from 10 minutes (00:10} to 11 hours, 59 minutes {11:59). 3. Press the Bake pad and select the oven _ ,,J temperature. Press the Autaset O pad for 350° F or the appropriate number pads. • BAKE will flash. • The oven temperature can be set from 170° F to 550° F. 7. When cooking is finished, press CANCEL pad. (CANCEL 4. Press the Bake pad again OR wait four seconds. 8. Remove food from the oven. BAKE will remain lit. Baking Notes: ° To change the oven temperature during cooking, press Bake, then press the Autoset 0 or appropriate number pads until the desired temperature is displayed. • To change the oven temperature during preheat, press the Bake pad twice, then press the Autoset O pad or appropriate number pads until the desired temperature is displayed. • If you forget to turn off the oven, it will automatically turn off at the end of 12 hours. If you wish to deactivate this feature, see page 9. • The cooking time will show in the display. ° The actual oven temperature will be displayed during preheat. ° The set temperature will display when the oven is preheated. When the cooking time has elapsed: • Four beeps will sound. • HOLD and WARM will light. ° 170°will display. ° Time of day will display.