Jensen UMP9020 Owners Manual - Page 18
Specifications
View all Jensen UMP9020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
SPECIFICATIONS CD-R and CD-RW Capability Depending on media type and method of "recording/burning", some CD-R/RWs may be incompatible with this unit. After "recording/ burning", the session must be closed. Please refer to your software's recommended procedures for closing a disc/session. Review your recording software to familiarize yourself with the correct "recording/burning" procedures. We recommend using the latest versions of ROXIOTM or NEROTM burning software. In addition, this unit will only recognize the CDDA (Compact Disc Digital Audio), .MP3 and .WMA formats "recorded / burned" onto a CDR/RW. This unit does not support .WAV, .OGG or other formats. Technical Specifications CEA Power Ratings Power Output: 13 watts RMS X 4 channels into 4-ohms @ < 1% THD+N Signal to Noise Ratio: 70dBA below reference. (Reference: 1 watt, 4-ohms) Frequency Response: 20Hz to 20kHz, -3dB Reference Supply Voltage: 14.4VDC CD Player Signal to Noise Ratio: >75dBA Frequency Response: 20Hz to 18kHz, -3dB Channel Separation: > 55dB @ 1kHz D/A converter: 1Bit/Ch FM Tuner Tuning Range: 87.5MHz - 107.9MHz Mono Sensitivity: 18dBf 50dB Stereo Quieting Sensitivity: 20dBf Stereo Separation @ 1kHz: >30dB Frequency Response: 30Hz to 12kHz, -3dB 18 UMP9020 AM Tuner Tuning Range: 530kHz - 1710kHz Sensitivity @ 20dB Signal to Noise: 30uV Frequency Response: 30Hz - 2kHz, -3dB General Power Supply: 11 to 16VDC, negative ground Fuses: Battery - 15 amp/ATO, Ignition/ Accessory - 0.5 amp AGC 20 pin quick-connect harness Double Din Chassis Dimensions: 4"H x 7"W x 7"D (102mm x 178mm x 178mm) Specifications subject to change without notice.