Jensen VM9511TS Instruction Manual - Page 5
Preparation - touch screen
UPC - 043258303011
View all Jensen VM9511TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
VM9511TS PREPARATION Congratulations on your purchase of the Jensen VM9511TS Mobile Multimedia AM/FM/DVD Receiver. It's a good idea to read all of the instructions before beginning the installation. We recommend having your Jensen VM9511TS installed by a reputable installation shop. Features DVD • Compatible formats: DVD-R, DVD-RW, DVD+R, DVD+RW, CD-R, CD-RW, CD-DA, MP3, WMA, SVCD, VCD, MPEG2, MPEG4, AVI and JPEG • Region 1 playback • 16:9 Aspect ratio- Wide / Normal / Cinema • Front panel DVD control • High-speed Fast Forward / Fast Rewind 2X, 4X, 8X, 32X • Play, Pause, Stop, Slow • Chapter Up / Down • V-SEL - MultiZone output 'Kid-Zone' • Wolfson Microelectronics high performance 24-bit, 192 kHz DAC supports 6-channel and 2-channel "Down-Mix" audio modes • 16MB high-speed flash memory - 80nS access time • 2 second ESP (Electronic Skip Protection) Integrated SD Card Reader • Compatible formats: MP3, WMA, AVI, MPEG1, MPEG2, MPEG4 and JPEG • Supports up to 2GB SD card MP3/WMA • GIGA MP3 - Store up to 999 MP3 files on a DVD • ID3-tag compatible • Direct track access • Play, Pause, Stop, Track Up / Down • 60 second (MP3), 120 second (WMA) ESP - Electronic Skip Protection CD • CD-text compatible • 4 second ESP (Electronic Skip Protection) AM/FM Tuner • User-selectable frequency spacing • 30 Station presets (18FM/12AM) JENSEN Plus Tuner II Outboard Media Module • Input adapter for TV Tuner, XM and iPod TV Tuner (Included) • VHF 2-13 • UHF 14-69 • TV antenna (3.5mm antenna included) • F-Connector/Coaxial Antenna Input (optional) XM Ready • Requires optional Terk XMD1000 tuner box • Requires optional Terk XMDJEN100 or Jensen JXMC XM cables • Advanced display shows the artist, song title, and XM channel and category at a glance • Direct channel entry Navigation Ready • Requires optional NAV100 navigation module jLink Ready • Controls and charges all iPod's except "Shuffle" • Displays all text information including category, track name, artist and channel number Chassis • 7-inch TFT touch screen LCD - 336,960 pixels (1440W X 234H) • TSD - Touch Screen Display menu control • Fully automatic motorized TFT LCD flip-out and up • 16-step TFT LCD tilt adjustment • Beep Tone confirmation • 1.0 Din • Import/ISO/DIN mountable • Heat management system - Incorporates forced air- cooling to keep the chip-sets operating at nominal temperatures • Heavy duty galvanized chassis Multi-ZONE • Allows front passengers to listen to the radio while rear passengers listen to a CD, MP3, WMA or watch DVDs General • Full function infrared remote control • Limited function infrared "Kid Zone" remote • OSD - On Screen Display menu control • High-performance audio processor • Electronic volume, bass, treble, balance and fader • Bass center frequency adjustment - 60, 80, 100, 130, 150 and 200Hz • Bass Q factor - 1.0, 1.25, 1.5 and 2.0 • Treble center frequency adjustment - 10, 12.5, 15 and 17kHz • Subwoofer crossover - 80, 120 and 160Hz • Subwoofer Phase - 0 - 180 degrees • Subwoofer level - variable • 100-ohm low impedance pre-amp outputs, all channels • 5V Peak / 2V RMS RCA outputs, all channels • 1-pair front RCA outputs and 1-pair rear/surround RCA outputs • Single Subwoofer RCA output • Center Channel RCA pre-amp output (variable) • 1-pair headphone/Multi-ZONE RCA outputs • 1-pair auxiliary RCA A/V inputs • Back-up camera input with reverse override • 1 NTSC composite video output for additional screens • NTSC Multi-ZONE composite video for additional screens • Front panel (when screen is closed) high contrast LCD • Rotary encoder audio control • Joystick menu navigation Tools and Supplies You will need these tools and supplies to install your VM9511TS: • Torx type, flat-head and Philips screwdrivers • Wire cutters and strippers • Tools to remove existing radio (screwdriver, socket wrench set or other tools) • Electrical tape • Crimping tool • Volt meter/test light • Crimp connections • 18 gauge wire for power connections • 16 - 18 gauge speaker wire WARNING! Only connect the unit to a12-volt power supply with proper grounding. WARNING! Never install this unit where operation and viewing could interfere with safe driving conditions. WARNING! To reduce the risk of a traffic accident (except when using for rear-view video camera) never use the video display function while driving the vehicle. This is a violation of federal law. WARNING! Never disassemble or adjust the unit without the assistance of a professional. For details, please consult your local car stereo specialty shop. WARNING! To prevent injury from shock or fire, never expose this unit to moisture or water. 1